NI PXI-2556多通道矩陣開關模塊
1.產 品 資 料 介 紹：
中文資料：
NI PXI-2556是一款多通道矩陣開關模塊，用于在PXI（PCI eXtensions for Instrumentation）平臺上實現高密度、高速度的信號切換。以下是關于NI PXI-2556的配置說明、功能作用和應用領域的詳細信息：
NI PXI-2556配置說明：
- NI PXI-2556是一個19插槽3U PXI模塊，采用了基于繼電器的矩陣開關技術。
- 它提供了256個獨立的單刀雙擲（SPDT）繼電器，可用于實現高達128x2、64x4或32x8的信號切換。
- 每個通道都可以承受高達300 VDC/AC的電壓，最大電流為2 A。
- 模塊配備了豐富的連接器和信號引線，以便連接外部設備。
功能作用：
- 信號切換：NI PXI-2556可用于切換不同類型的信號源，如電壓、電流、頻率、溫度等。它可將輸入信號路由到所需的輸出通道上，從而實現信號的靈活控制和測量。
- 自動測試系統（ATE）：NI PXI-2556是ATE系統中的關鍵組件，可用于在生產測試和自動化測試環境中進行高速信號切換。
- 通信和射頻測試：NI PXI-2556的高帶寬和低插入損耗使其非常適用于通信和射頻測試領域，例如對天線、濾波器、功率放大器等進行測試。
- 傳感器和儀器控制：NI PXI-2556通過切換不同的傳感器或儀器信號，可以使用該模塊進行數據采集、監控和控制。
NI PXI-2556應用領域：
- 汽車電子：在汽車電子測試中，NI PXI-2556可用于切換車載電子設備的信號源和目標，例如儀表板、發動機控制單元（ECU）等。
- 航空航天：在航空航天領域，該模塊可用于信號路由和測試，以確保航空電子設備的正常運行。
- 通信：在通信行業中，NI PXI-2556可用于網絡測試和通信設備的功能驗證，以確保高質量和可靠的通信服務。
- 工業自動化：在工業自動化環境中，該模塊可用于控制和監控傳感器、執行器和其他工業設備。
- 科學研究：研究人員可以使用該模塊來進行實驗室測試、數據采集和儀器控制。
英文資料：
NI PXI-2556 is a multi-channel matrix switching module used for high-density and high-speed signal switching on the PXI (PCI eXtensions for Instrumentation) platform. The following is detailed information about the configuration, functional functions, and application areas of NI PXI-2556:
Configuration instructions for NI PXI-2556:
The NI PXI-2556 is a 19 slot 3U PXI module that utilizes relay based matrix switching technology.
It provides 256 independent single pole double throw (SPDT) relays that can be used for signal switching up to 128x2, 64x4, or 32x8.
Each channel can withstand a voltage of up to 300 VDC/AC, with a maximum current of 2 A.
The module is equipped with rich connectors and signal leads for connecting external devices.
Function:
Signal switching: NI PXI-2556 can be used to switch different types of signal sources, such as voltage, current, frequency, temperature, etc. It can route input signals to the required output channels, thereby achieving flexible control and measurement of signals.
Automatic Test System (ATE): NI PXI-2556 is a key component of the ATE system that can be used for high-speed signal switching in production testing and automated testing environments.
Communication and RF testing: The high bandwidth and low insertion loss of NI PXI-2556 make it very suitable for the field of communication and RF testing, such as testing antennas, filters, power amplifiers, etc.
Sensor and instrument control: NI PXI-2556 can be used for data acquisition, monitoring, and control by switching between different sensor or instrument signals.
NI PXI-2556 Application Areas:
Automotive Electronics: In automotive electronics testing, NI PXI-2556 can be used to switch signal sources and targets of on-board electronic devices, such as instrument panels, engine control units (ECUs), etc.
Aerospace: In the aerospace field, this module can be used for signal routing and testing to ensure the normal operation of avionics equipment.
Communication: In the communication industry, NI PXI-2556 can be used for network testing and Functional verification of communication equipment to ensure high-quality and reliable communication services.
Industrial automation: In industrial automation environments, this module can be used to control and monitor sensors, actuators, and other industrial equipment.
Scientific research: Researchers can use this module for laboratory testing, data collection, and instrument control.
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
