RELIANCE 45C-200A控制板
1.產 品 介 紹
品牌：RELIANCE
型號說明：RELIANCE 45C-200A控制板
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
請勿將外圍設備連接到RELIANCE 45C-200A轉換模塊上的端口1、端口3或Centronics打印機端口。在EIA-232-D情況下，這些端口均未連接到任何MVME162電路。在EIA-530的情況下，嘗試使用這些端口會產生某些連接，有可能損壞RELIANCE 45C-200A或外圍設備！警告：使用EIA-530 SIMM或EIA-485/EIA-422 SIMM時，請勿將RELIANCE 45C-200A嵌入式控制器連接到MVME712x板。P2適配器和轉接板不支持EIA-530、EIA-485和EIA-422信號。工業封裝（IP）接口MVME162FX嵌入式控制器上的IP2芯片ASIC支持四個工業封裝（IP）接口：可從前面板訪問。IP2還包括四個DMA信道（每個IP一個，或每個雙尺寸IP兩個）、32MHz或8MHz工業組時鐘選擇（跳線可選）和一個連接到四個接口的可編程時基選通。RELIANCE 45C-200A
Do not connect peripheral devices to Port 1, Port 3, or the Centronics printer port on the RELIANCE 45C-200A transition module. In the EIA-232-D case, none of these ports are connected to any MVME162 circuits. In the EIA-530 case, attempting to use these ports would produce certain connections with the potential to damage the MVME162 or the peripherals. ! Caution When using an EIA-530 SIMM or an EIA-485/EIA-422 SIMM, do not connect the MVME162FX Embedded Controller to an RELIANCE 45C-200A board. The EIA-530, EIA-485, and EIA-422 signals are not supported by the P2 adapter and the transition boards.Industry Pack (IP) Interfaces The IP2 chip ASIC on the RELIANCE 45C-200A Embedded Controller supports four Industry Pack (IP) interfaces: these are accessible from the front panel. The IP2 also includes four DMA channels (one for each IP, or two for each double size IP), 32MHz or 8MHz Industry Pack clock selection (jumper selectable), and one programmable timebase strobe which is connected to the four interfaces.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
