GESPAC GESRAM-14C-9318內存板
GESPAC GESRAM-14C-9318參考選擇與所有位置或點相關的參考坐標系?；鶞?zhǔn)中心點（A）單擊其中一個框，然后單擊圖形窗口中的中心點，將值傳遞到基準中心點框，或鍵入位置。中心點將是圓柱體的局部原點。方向如果對象應相對于參考坐標系旋轉，請指定旋轉。半徑（B）指定圓柱體的半徑。直徑指定圓柱體的直徑。高度（C）指定圓柱體的高度。參考選擇與所有位置或點相關的參考坐標系。GESPAC GESRAM-14C-9318基準中心點（A）單擊其中一個框，然后單擊圖形窗口中的中心點，將值傳遞到基準中心點框，或鍵入位置。中心點將是金字塔的局部原點。方向如果對象應相對于參考坐標系旋轉，請指定旋轉。中心到角點（B）鍵入位置，或在框中單擊，然后在圖形窗口中選擇點。高度（C）指定棱錐體的高度。邊數指定棱錐體的邊數。最大邊數為50。GESPAC GESRAM-14C-9318
GESPAC GESRAM-14C-9318內存板
Reference Select the Reference coordinate system to which all positions or points will be related. Base Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Base Center Point boxes, or type the position. The center point will be the local origin of the cylinder. Orientation If the object shall be rotated relative to the reference coordinate system, specify the rotation. Radius (B) Specify the radius of the cylinder. Diameter Specify the diameter of the cylinder. Height (C) Specify the height of the cylinder.Reference Select the Reference coordinate system to which all positions or points will be related. Base Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Base Center Point boxes, or type the position. The center point will be the local origin of the pyramid. Orientation If the object shall be rotated relative to the reference coordinate system, specify the rotation. Center to Corner Point (B) Either type the position, or click in the box and then select the point in the graphics window. Height (C) Specify the height of the pyramid. Number of Sides Specify the number of sides of the pyramid. The maximum number of sides is 50.GESPAC GESRAM-14C-9318
公司主營優勢
應用行業
