FANUC A06B-6121-H075伺服放大器
1是可能的。耦合組件（鏈接設備）用于將PA總線集成到PROFIBUS DP網絡中。這確保通過完整的PROFIBUS系統（DP和PA）在連續連接的網絡中提供所有信息。PROFIBUS DP通過AC800M中的PROFIBUS DP-V1模塊CI854/CI854A與IEC61131控制器AC 800M連接。對于高可用性，支持冗余。PROFIBUS的配置是通過Control Builder M完成的。配置包括硬件樹中硬件單元的規劃以及主設備和從設備的設備特定配置。設備特定配置數據在設備制造商提供的設備特定GSD文件中描述。為了允許在Control Builder M中配置設備，必須將GSD文件轉換為HWD文件并插入到項目中。轉換使用GSD導入工具完成。
1 are possible.
Coupling components (Linking Devices) are used to integrate PA bus lines into the
PROFIBUS DP network. This ensures that all information is available in a
continuously connected network through the complete PROFIBUS system (DP and
PA).The PROFIBUS DP is interfaced to the IEC61131 controller AC 800M using the
PROFIBUS DP-V1 module CI854/CI854A in the AC800M. For high availability
redundancy is supported.
The configuration for the PROFIBUS is done with the Control Builder M. The
configuration covers the planning of the HW units in the HW tree and the device
specific configuration for the master and slave units as well. The device specific
configuration data is described within the device specific GSD File provided by the
manufacturer of the device. To allow the configuration of the device within the
Control Builder M the GSD File has to be converted to a HWD File and inserted to
the project. The conversion is done with the GSD Import Tool.
