FOXBORO FBM207c P0917GY I/O模塊
使用/鍵顯示要從默認消息隊列中刪除的設置點或?qū)嶋H值消息，并執行以下步驟。默認消息亮度設置點僅適用于具有較舊硬件版本的PQM，包括三相實際功率=1000 kW以刪除此消息。按下存儲鍵和重置鍵時，從顯示3秒的默認消息隊列中刪除實際值或設置點當按順序按下存儲鍵和重置鍵時，顯示3秒的REDEFMSG.VSD NOT A SELECTED DEFAULT MESSAGE（重置）信息。每個PQM預先編程有五條默認信息，如下所示。注意，每次重新加載出廠設置點時，用戶編程的默認信息都會被這些信息覆蓋。PQM將按所示順序滾動瀏覽默認消息。
Use the / keys to display the setpoint or actual value message to be deleted from the default message queue and follow the steps below. The DEFAULT MESSAGE BRIGHTNESS setpoint is only applicable for PQMs with older hardware revisions that includ THREE PHASE REAL POWER = 1000 kW TO DELETE THIS MESSAGE PRESS STORE DEFAULT MESSAGE REMOVED ACTUAL VALUE OR SETPOINT TO BE REMOVED FROM THE DEFAULT MESSAGE QUEUE DISPLAYED FOR 3 SECONDS WHEN STORE KEY AND RESET KEY ARE PRESSED IN SEQUENCE DISPLAYED FOR 3 SECONDS WHEN STORE KEY PRESSED REDEFMSG.VSD NOT A SELECTED DEFAULT MESSAGE DISPLAYED FOR 3 SECONDS WHEN STORE KEY AND RESET KEY ARE PRESSED IN SEQUENCE Each PQM is pre-programmed with five default messages as shown below. Note, each time the factory setpoints are reloaded the user programmed default messages are overwritten with these messages. The PQM will scroll through the default messages in the sequence shown.
轉載請附上此鏈接：http://www.qing-ting.cn/
