3BSE018164R1控制處理模塊
輪詢，輪詢NIS模塊將其狀態表中的信息用于輪詢目的。當它掃描狀態表時，它會選擇已標記為脫機或忙碌的多播消息的目標。輪詢目標后，NIS模塊更新其表并將相關信息轉發給其他通信模塊。INICT01 INFI-NET至計算機傳輸模塊INICT01-INFI-NET至計算機傳輸模組（ICT）提供指導INFI-NET-COMPUTER接口操作所需的電子設備。它通過RS-232-C串行通信端口處理與主機的所有通信。它通過I/O擴展器總線直接與NIS模塊通信。當通過串行端口進行通信時，ICT模塊可以充當數據通信設備（DCE）或數據終端設備（DTE）。終端單元（NTMF01）或模塊（NIMF01或NIMF02）上的雙列直插式搜索配置確定此計算機接口是否作為DTE或DCE運行。ICT模塊有足夠的內存，可以存儲多達10000個點定義（取決于點類型）。ICT模塊固件使主機能夠發出數據采集、過程監控和控制以及系統功能（安全、時間和配置控制）的命令。ICT模塊維護點表并解釋來自主機的命令。因此，它指導主機和INFI-NET系統之間的所有交互。
ICT模塊從INFI 90模塊接收數據，然后進行分類
并將其存儲在其數據庫中。NIS模塊從INFI-NET系統接收幀，并將其傳遞給ICT模塊進行處理。然后，信通技術模塊對這些輸入數據進行分類，存儲異常報告和輸入請求，直到主機準備好接收數據。此緩沖操作允許主機完全與INFI-NET循環異步操作。當主機準備好處理更多數據時，它向ICT模塊發出一個命令，該模塊將數據作為答復轉發。INICT03 INFI-NET到計算機傳輸模塊INICT03INFI-NET-COMPUTER TRANSFER MODULE（ICT）還提供了指導INICI03 INFI-NET到計算機接口操作所需的電子設備。它通過IMMPI01多功能處理器接口模塊（MPI）SCSI或RS-232-C通信端口處理與主機的所有通信。當通過RS-232-C串行端口進行通信時，MPI模塊可以充當數據通信設備（DCE）或數據終端設備（DTE）。終端單元（NTMP01）或終端模塊（NIMP01或NIMP02）上的跳線配置決定了該接口是否作為DTE或DCE運行。它還通過I/O擴展器總線與NIS模塊直接通信。
POLLING
The NIS module uses the information in its status table for polling purposes. As it scans the status table, it picks out destinations targeted for multicast messages that have been marked off-line or busy. After polling the destination, the NIS module updates its table and forwards pertinent information to other communication modules. INICT01 INFI-NET TO COMPUTER TRANSFER MODULE The INICT01 INFI-NET to Computer Transfer Module (ICT) provides the electronics needed to direct the operation of the INFI-NET to Computer Interface. It handles all communication with the host computer through a RS-232-C serial communication port. It communicates directly with the NIS module over the I/O expander bus. When communicating through the serial port, the ICT module can act as data communication equipment (DCE) or data terminal equipment (DTE). The dipshunt configuration on the termination unit (NTMF01) or module (NIMF01 or NIMF02) determines if this computer interface operates as DTE or DCE. The ICT module has enough memory that it can store up to 10,000 point definitions (depending on point types). ICT module firmware enables the host computer to issue commands for data acquisition, process monitoring and control, and system functions (security, time and configuration control). The ICT module maintains the point table and interprets commands coming from the host computer. Thus, it directs all interaction between the host computer and the INFI-NET system.
The ICT module receives data from INFI 90 modules and then sorts
organizes, and stores it in its database. The NIS module receives frames from the INFI-NET system and passes them on to the ICT module for processing. The ICT module then sorts this incoming data, storing exception reports and incoming requests until the host computer is ready for the data. This buffering action allows the host computer to operate completely asynchronously to the INFI-NET loop. When the host is ready to process more data, it issues a command to the ICT module that forwards the data as a reply. INICT03 INFI-NET TO COMPUTER TRANSFER MODULE The INICT03 INFI-NET to Computer Transfer Module (ICT) also provides the electronics needed to direct the operation of the INICI03 INFI-NET to Computer Interface. It handles all communication with the host computer through the IMMPI01 Multi-Function Processor Interface Module (MPI) SCSI or RS-232-C communication ports. When communicating through the RS-232-C serial port, the MPI module can act as data communication equipment (DCE) or data terminal equipment (DTE). The jumper configuration on the termination unit (NTMP01) or termination module (NIMP01 or NIMP02)determines if this interface operates as DTE or DCE. It also communicates directly with the NIS module over the I/O expander bus.
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
