UCD240A01熱電偶模塊
模塊完整性所有INFI-NET通信模塊都具有確保模塊完整性的正常INFI 90安全功能。模塊硬件檢查非法地址并監控機器故障計時器（MFT）和I/O擴展器總線時鐘。如果模塊檢測到非法地址，它將生成總線錯誤并在面板LED上顯示錯誤代碼。如果微處理器未能重置MFT計時器，則它將過期。發生這種情況時，通信模塊停止，狀態LED變?yōu)榧t色。模塊硬件還監控I/O擴展器總線時鐘。如果沒有時鐘信號，模塊硬件會產生中斷。INNIS01網絡接口從模塊NIS模塊用作INICT01和INICT03模塊的I/O模塊。雖然每個計算機接口使用不同的INFI-NET通信模塊，但NIS模塊與每個通信模塊的操作方式相同。本節概述了INFI-NET通信模塊的工作原理NIS模塊處理四種不同的消息類型。它們是廣播、時間同步、多播和NIS輪詢。廣播NIS模塊在向所有系統節點發送信息時生成廣播消息。通常，這些消息會宣布節點狀態的更改。廣播消息包括節點在線、節點離線、節點重啟和節點忙碌。
異常報告
每個INFI 90模塊為過程輸入（點）建立異常報告參數。異常報告參數的一些示例包括高報警限值和低報警限值、最小和最大報告時間間隔以及量程限值的變化百分比。當一個點的變化超過給定參數，或報警狀態發生變化時，模塊會生成異常報告。計算機傳輸模塊（通過Controlway或模塊總線）輪詢模塊以獲取異常報告，并將異常報告打包為具有公共節點目的地。打包將一個目的地（或多個目的地）的所有異常報告放入一條消息（長度可變）中。NIS模塊將此消息發送到其他INFI-NET節點。此過程減少了所需的傳輸次數，并調整了消息大小以獲得最大的INFI-NET循環效率。異常報告可以具有以下格式的數據值：布爾、模擬、數字和狀態報告。異常報告帶有時間戳，以反映其處理順序。最大和最小報告時間參數確保為靜態或快速變化的數據生成異常報告。最小報告時間參數控制單個快速變化點生成的異常報告的數量。最長報告時間參數會生成定期異常報告，報告的數據項不會更改或更改非常緩慢。注：如果某個點進入或退出報警，則忽略時間參數并立即生成異常報告
MODULE INTEGRITY
All INFI-NET communication modules have normal INFI 90 security functions that insure module integrity. The module hardware checks for illegal addresses and monitors the machine fault timer (MFT) and the I/O expander bus clock. If a module detects an illegal address, it generates a bus error and displays an error code on the faceplate LEDs. If the microprocessor fails to reset the MFT timer, it expires. When this happens, the communication module stops and the status LED turns red. Module hardware also monitors the I/O expander bus clock. If there is no clock signal, the module hardware generates an interrupt. INNIS01 NETWORK INTERFACE SLAVE MODULE The NIS module serves as an I/O module to both the INICT01 and INICT03 modules. While each computer interface uses different INFI-NET communication modules, the NIS module operates with each communication module in the same manner. This section provides an overview of INFI-NET communication module operating theory The NIS module processes four different message types. They are broadcast, time synchronization, multicast, and NIS poll. BROADCAST The NIS module generates a broadcast message when sending information to all system nodes. Typically, these messages announce changes in node status. Broadcast messages include NODE ONLINE, NODE OFFLINE, NODE RESTART and NODE BUSY.
Exception Reports
Each INFI 90 module establishes exception reporting parameters for process inputs (points). Some examples of exception report parameters are high and low alarm limits, minimum and maximum report time intervals, and percent of change in span limits. When a point changes more than a given parameter, or an alarm state changes, the module generates an exception report. The computer transfer module polls modules (via the Controlway or module bus) for exception reports, and packs the exception reports having a common node destination. Packing places all exception reports for a destination (or multiple destinations) into one message (of variable length). The NIS module sends this message to other INFI-NET nodes. This process reduces the number of transmissions required, and adjusts the message size for maximum INFI-NET loop efficiency. Exception reports can have data values in the following formats: Boolean, analog, digital and status report. Exception reports are time stamped to reflect their processing sequence. The maximum and minimum report time parameters insure that an exception report is generated for static or rapidly changing data. The minimum report time parameter controls the quantity of exception reports a single rapidly changing point generates. The maximum report time parameter generates a periodic exception report of data items that do not change or change very slowly. NOTE: If a point goes into or out of alarm, the time parameters are ignored and an exception report is generated immediately
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
