產品詳情介紹
BOSCH 1070079403-106控制器
探頭壓力3300 5 mm和3300 XL 8 mm探頭設計用于密封探頭尖端和外殼之間的壓差。探頭密封材料由Viton?O型環組成。探頭在裝運前未進行壓力測試。如果您需要對應用的壓力密封進行測試，請聯系我們的定制設計部門。注：客戶或用戶有責任確保包含所有液體和氣體，并在近貼探頭發生泄漏時進行安全控制。此外，pH值高或低的溶液可能腐蝕探針的尖端組件，導致介質泄漏到周?chē)鷧^(qū)域。Bently Nevada Corporation不對因接近探頭泄漏而造成的任何損壞負責。此外，由于探針泄漏，根據服務計劃，3300 5 mm和3300 XL 8 mm接近型探針不會更換。鋁探頭安裝支架是大多數3300和3300 XL探頭安裝的標準安裝支架。-01和-02選項配有兩個10-24 UNC-2A安裝螺釘。-03和-04選件配有兩個M5 x 0.8-6g安裝螺釘。安裝螺釘已預先鉆好安全線孔。如果需要與安裝位置進行額外的電氣隔離（如某些發電機和電機軸承位置），建議使用酚醛安裝支架。-01和-02選項配有兩個10-24 UNC-2A安裝螺釘。-03和-04選件配有兩個M5 x 0.8-6g安裝螺釘。安裝螺釘已預先鉆好安全線孔。
UMT 1是用于測量真實RMS值的測量傳感器。
UMT 1可以通過電流和電壓測量輸入測量三相電氣系統。主要測量值在雙線16字符LC顯示器上計算和顯示，也可通過模擬輸出（可配置為-20至20 mA、0至20 mA或4至20 mA）或通信接口傳輸至更高級別的控制系統。電壓和電流的主要測量值用于計算實際、無功和視在功率、功率因數（cosphi）、kWh和kvarh的值。kWh和kVarh也可以通過使用脈沖輸出傳輸。測量值列表包括07KR51-HSB基于基本50系列中央單元。此版本的帶有冗余固件的50系列中央單元可用于CS31上的熱備用功能。這意味著，如果熱備用主機關閉，熱備用遠程中央單元可以直接處理CS31總線上的所有輸入和輸出，而不會中斷過程。熱備用遠程中央單元僅讀取CS31總線上的所有輸入，它執行自己的程序，無需任何輸出分配。兩個中央單元中的用戶程序可能不同（例如，執行關機順序）。如果熱備用主中央單元出錯，熱備用遠程中央單元將在最多3個周期內接管。
Probe Pressure
3300 5 mm and 3300 XL 8 mm probes are designed to seal differential pressure between the probe tip and case. The probe sealing material consists of a Viton? O-ring. Probes are not pressuretested prior to shipment. Contact our custom design department if you require a test of the pressure seal for your application. Note: It is the responsibility of the customer or user to ensure that all liquids and gases are contained and safely controlled should leakage occur from a proximity probe. In addition, solutions with high or low pH values may erode the tip assembly of the probe causing media leakage into surrounding areas. Bently Nevada Corporation will not be held responsible for any damages resulting from leaking proximity probes. In addition, 3300 5 mm and 3300 XL 8 mm proximity probes will not be replaced under the service plan due to probe leakage.The aluminum probe mounting bracket is the standard mounting bracket for most 3300 and 3300 XL probe installations. The -01 and -02 options are supplied with two 10-24 UNC-2A mounting screws. The -03 and -04 options are supplied with two M5 x 0.8-6g mounting screws. The mounting screws have predrilled holes for safety wire.The phenolic mounting bracket is recommended if additional electric isolation from the mounting location is required (as in some generator and electrical motor bearing locations). The -01 and -02 options are supplied with two 10-24 UNC-2A mounting screws. The -03 and -04 options are supplied with two M5 x 0.8-6g mounting screws. The mounting screws have predrilled holes for safety wire.
The UMT 1 is a measuring transducer for true RMS values.
The UMT 1 can measure an electrical three-phase system with current and voltage measuring inputs. The primary measured values are calculated and displayed on the two-line, 16 character LC Display, and also transmitted by either analog outputs (configurable as -20 to 20 mA, 0 to 20 mA, or 4 to 20 mA) or a communication interface to a higher level-control system. The primary measured values of voltage and current are used to calculate the values for real, reactive, and apparent power, power factor (cosphi), kWh, and kvarh. The kWh and kVarh can also be transmitted by using an pulse output. The list of measured values includes The 07KR51-HSB is based on the basic 50 series central units. This version of 50 series central unit with redundancy firmware can be used in hot stand-by functionalities on CS31. The meaning is that a hot stand-by remote central unit can handle directly all inputs and outputs on CS31 bus if the hot stand-by master shuts down, without any discontinuity on the process. The hot stand-by remote central unit is only a reading of all inputs on the CS31 bus and it executes its own program without any output assignment. The user program in both central units can be different (for example to implement a shutdown sequence). In case of an error in the hot standby master central unit, the hot stand-by remote central unit will take over within a maximum of 3 cycle times.
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
