AIM0006輸出電子卡件
電壓電平設定值可在0到250 Vdc之間調節。磁場過電壓時間延遲固定為10秒。
限定檢索
DECS-100限制器由勵磁電流增加觸發的過勵磁限制器（OEL）和由過多超前VAR觸發的欠勵磁限制器（UEL）。過勵磁限制DECS-100提供兩種類型的過勵磁限制：求和點和接管。
這是OEL的求和點。當磁場電流水平增加到可調電流水平設定點以上時，前面板和BESTCOMS過勵磁限制指示燈亮。如果過勵磁條件在用戶可調報警時間延遲持續時間內，端子AL1和AL2處的繼電器輸出AL2關閉。
求和點型OEL的優點在于，它可以提供進出的平滑過渡極限。其缺點是它不能直接控制磁場電流，但必須通過正常電流工作并且可能受到端子電壓變化的影響。
接管OEL。當使用接管式過勵磁限制時，磁場電流水平限制由可調電流水平設定點確定。如果磁場電流增加超過可調電流水平設定點、前面板和BESTCOMS過勵磁限制指示器光和磁場電流受到限制并被迫遵循反時間曲線。接管型OEL的優點在于，它提供勵磁機勵磁電流的直接控制而不依賴于正常電壓調節器的控制動作。
其缺點是它可能不提供平穩過渡到和超出極限
如果啟用了硬件關機，則DECS-100將在延時到期時禁用。當過勵磁限制觸發停機后，DECS-100通電，過勵磁限位指示燈將點亮5秒鐘。
電流電平設定值可在0到15 Adc之間調整。報警時間延遲可從0調整到10秒。
欠勵磁限制當領先var的水平增加到可調var水平設定點以上時，前面板和BESTCOMS欠勵磁限制指示燈亮。如果欠勵磁條件持續存在，則在可調報警時間延遲的持續時間內，端子AL1和AL2處的繼電器輸出閉合。
如果啟用了硬件關機，則DECS-100將在延時到期時禁用。當DECS-100在欠勵磁限制觸發停機后通電，欠勵磁限位指示燈將點亮5秒鐘。
The voltage level setpoint is adjustable from 0 to 250 Vdc. The field overvoltage time delay is fixed at 10 seconds. Limiters DECS-100 limiters consist of an overexcitation limiter (OEL) triggered by an increase in field current and an underexcitation limiter (UEL) triggered by excessive leading vars. Overexcitation Limiting The DECS-100 provides two types of overexcitation limiting: summing point and takeover. Summing Point OEL. When the level of field current increases above the adjustable current level setpoint, the front panel and BESTCOMS Overexcitation Limiting indicators light. If the overexcitation condition persists for the duration of the user-adjustable alarm time delay, the relay output at terminals AL1 and AL2 closes. The advantage of a summing-point type of OEL is that it can provide a smooth transition into and out of the limit. Its drawback is that it does not control field current directly, but has to work through the normal voltage regulator, and may be influenced by changes in terminal voltage. Takeover OEL. When takeover-style overexcitation limiting is used, the level of field current at which limiting occurs is determined by an adjustable current level setpoint. If the field current increases above the adjustable current level setpoint, the front panel and BESTCOMS Overexcitation Limiting indicators light and the field current is limited and forced to follow the inverse time curve. The advantage of a takeover type of OEL is that it provides direct control of the exciter field current without relying on the normal voltage regulator’s control action. Its drawback is that it may not provide a smooth transition into and out of the limit. If hardware shutdown is enabled, the DECS-100 will be disabled when the time delay expires. When the DECS-100 is powered up following a shutdown triggered by overexcitation limiting, the Overexcitation Limiting indicator will light for five seconds. The current level setpoint is adjustable from 0 to 15 Adc. The alarm time delay is adjustable from 0 to 10 seconds. Underexcitation Limiting When the level of leading vars increases above the adjustable var level setpoint, the front panel and BESTCOMS Underexcitation Limiting indicators light. If the underexcitation condition persists for the duration of the adjustable alarm time delay, the relay output at terminals AL1 and AL2 closes. If hardware shutdown is enabled, the DECS-100 will be disabled when the time delay expires. When the DECS-100 is powered up following a shutdown triggered by underexcitation limiting, the Underexcitation Limiting indicator will light for five seconds.
