主營產品
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
UFC760BE1142順序控制卡件
消除控制范圍內的干擾源內閣保持B類（無線電干擾抑制）規定的限值N級）符合DIN VDE 0470-1，1992年11月版和表1符合DIN EN 55014第12/93版機器（特別是住宅區和輕工業區內的運營），包括：
應用：?屏蔽電機電源電纜或使用屏蔽電機電源電纜。
?使用控制器上的屏蔽附件。
?在電源線中使用合適的干擾抑制濾波器
確保機器或設備正確安裝，以及操作的。
如果每個應用感應負載（如扼流圈、接觸器或繼電器）
接觸或半導體，則這些負載必須是干擾抑制：
?使用三相運行的續流二極管。
?使用接觸器型相關RC干擾抑制電路
a、 c.業務。
?將抑制裝置直接安裝在電感附近
（例如接觸器線圈）。否則，抑制效應可能是：顯著降低。
?不要將變阻器用作抑制器電路。
如果使用高頻設備（例如，環氧化合物的成分設備），然后?將其單獨安裝在機柜外部，并相應接線
（如果條件需要，可能需要單獨的機柜）。注：有關詳細信息，請參閱項目規劃手冊“電磁
“交流驅動器中的兼容性（EMC）”，文檔類型DOK-GENERL-EMC******-PRxx-EN-P。
只有機器制造商可以檢查EMC限值是否正在維護。這些機構可以是：
?用于焊接的烙鐵
?人體（通過接觸導電接地物體接地）
?零件和工具（放置在導電表面上）
危險零件只能在導電狀態下儲存或運輸包裝材料
注：力士樂Indramat的圖表只能由
機器制造商將為設施連接設施時，終端用戶應僅使用
機器制造商圖
Eliminating Interference Sources within the Control
Cabinet
To maintain the limits set forth for class B (radio interference suppression
level N) in accordance with DIN VDE 0470-1, edition dated 11/92 and
table 1 as per DIN EN 55014, edition 12/93 at the machine (especially for
operation within residential and light industrial areas), the following
applies:
? Route motor power cables shielded or use shielded motor power
cables.
? Use the shield attachment on the controllers.
? Use a suitable interference suppression filter in the mains supply leads
of the machine or plant and make sure it is properly mounted and
operated.
If inductive loads (e.g., chokes, contactors or relays) are applied per each
contact or semi-conductor, then these loads must be interference
suppressed:
? Use free-wheeling diodes with three-phase operations.
? Use contactor-type related RC interference suppression circuit with
a.c. operations.
? Mount the suppression devices in direct proximity to the inductance
(e.g., contactor coil). The suppression effect could otherwise be
significantly decreased.
? Do not use varistors as suppressor circuits.
If high-frequency devices are used (e.g., components of eloxidating
devices), then
? mount these outside the cabinet separately and wire them accordingly
(possibly a separate cabinet if conditions should call for this).
Note: For details, see the project planning manual "Electromagnetic
Compatibility (EMC) in AC Drives", doc. type
DOK-GENERL-EMC********-PRxx-EN-P.
Only the manufacturer of the machine can check whether the EMC limits
are being maintained or not.These bodies can be:
? the soldering iron used for soldering
? the human body (grounded by touching a conductive, grounded object)
? parts and tools (placed on a conductive surface)
Endangered parts may only be stored or transported in conductive
packaging.
Note: The diagrams of Rexroth Indramat should only be used by a
Machine Manufacturer to create terminal diagrams for a
facility. When wiring a facility, an End user should only use the
diagrams of the Machine Manufacturer
