主營產品
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
ASSY 11994R13機械設備卡件
必須對所有繼電器重復此步驟。配置文件繪圖。TXT不再是必需的，并且不會出現有關丟失樁號文件的錯誤消息。WINEVE提供了編輯和重新保存所有工作站的功能參數（文本、顏色等）。例外：必須在文件中更改比率TR陰謀。TXT和文件重新導入并再次保存，如上所述將文件“PLOT.TXT”復制到以下目錄：C： \SMS\REVAL\EVENTS
REVAL重新讀取文件繪圖。然而，每次加載干擾記錄時，在繪圖中指定任何顏色。TXT是忽略。相反，顏色由REVAL指定，可以加載干擾記錄后編輯。同步檢查功能（同步檢查）
檢查同步標準（振幅、相移以及頻率差），并且如果滿足相應的限制，則使它們能夠并聯連接。B、 特征
監測同步：?jiǎn)蜗嚯妷簻y(cè)量。
比較兩個電壓矢量的電壓（dU）、相移（dPh）和頻率（df）。計算這是一個復雜的平面。
基頻分量的評估
電壓信號（諧波和直流分量濾波后）。監測電壓：?jiǎn)蜗嗷蛉嚯妷簻y(cè)量。
瞬時值評估（非數字濾波模擬信號），導致較大的允許頻率
范圍三者中最大和最小的檢測三相測量時的相電壓。
無諧波或直流分量濾波。母線和線路側電壓I/P的相位選擇
（用于振幅和相位角調整）。附加電壓I/P（用于雙母線站）提供遠程切換。
提供操作模式的遠程選擇。二進制輸出：功能拾?。▎?dòng)）
斷路器閉合使能信號（“PermitToClos”）
功能禁用信號（“SyncBlockd”）
啟用O/P阻塞信號（TrigBlockd）
同步檢查旁路信號（超同步）
允許范圍內的振幅差（Amplifok）
允許范圍內的最大相位差（相位差）允許范圍內的頻率差（FreqDifOk）
母線通電（現場總線）母線斷電（死母線）線路通電（帶電線路）線路斷電（截止日期）。
This procedure must be repeated for all the relays. The configuration file PLOT.TXT is no longer necessary and the error message concerning the missing station file does not appear.
WINEVE provides facility for editing and resaving all the station
parameters (texts, colours etc.).
Exception: The ratios TR have to be changed in the file
PLOT.TXT and the file re-imported and saved again as described above.REVAL
Copy the file “PLOT.TXT” to the following directory:
C:\SMS\REVAL\EVENTS
REVAL rereads the file PLOT.TXT every time a disturbance record is loaded, however, any colours specified in PLOT.TXT are
ignored. Instead, the colours are assigned by REVAL and can be
edited after a disturbance record has been loaded.Synchrocheck function (SynchroCheck)
A. Application
Checking the synchronisation criteria (amplitudes, phase-shift
and frequency difference) of two electrical systems and, providing the corresponding limits are satisfied, enabling them to be
connected in parallel.
B. Features
Monitoring synchronism:
Single-phase voltage measurement.
Comparison of the voltages (dU), phase-shift (dPh) and frequencies (df) of two voltage vectors. Calculation of the corresponding differences between the voltage vectors in the
complex plane.
Evaluation of the fundamental frequency components of the
voltage signals (after filtering of harmonic and DC components).
Monitoring voltage:
Single or three-phase voltage measurement.
Evaluation of instantaneous values (non-digitally filtered
analogue signals) resulting in a large permissible frequency
range. Detection of the largest and smallest of the three
phase voltages in the case of three-phase measurement.
No filtering of harmonics or DC component.
Choice of phase for the voltage I/P’s on busbar and line sides
(for amplitude and phase-angle adjustment).
Additional voltage I/P (for use in double busbar stations) with
provision for remote switchover.
Provision for remote selection of the operating mode. Binary outputs:
Function pick-up (Start)
Circuit-breaker closing enable signal (‘PermitToClos’)
Function disabled signal (‘SyncBlockd’)
Enable O/P blocked signal (TrigBlockd)
Synchrocheck bypass signal (OverridSync)
Amplitude difference in permissible range (AmplDifOk)
maxPhaseDif in permissible range (PhaseDifOk)
Frequency difference in permissible range (FreqDifOk)
Busbars energised (LiveBus)
Busbars de-energised (DeadBus)
Line energised (LiveLine)
Line de-energised (DeadLine).
