Tokyo Electron 3208-000146-11輸入/輸出模塊 PDF資料
1.產 品 資 料 介 紹：
中文資料：
TEL Tokyo Electron 3208-000146-11 輸入/輸出模塊（Input/Output Module） 是 Tokyo Electron 半導體設備控制系統中的關鍵組成部分，主要用于實現設備與外部傳感器、執行機構之間的信號交換，負責采集設備運行的各種輸入信號并輸出控制指令，保障工藝流程的準確執行。
一、基本信息
產品型號： 3208-000146-11
產品名稱： 輸入/輸出模塊（I/O Module）
制造商： Tokyo Electron Ltd.（TEL）
模塊類別： 數字及模擬信號采集與輸出模塊
安裝方式： 機架插拔式模塊，集成于控制柜或機架系統中
二、主要功能
數字輸入與輸出
接收來自傳感器、開關量信號的數字輸入（DI），如限位開關、門控傳感器、按鈕狀態等；
控制繼電器、電磁閥等執行器的數字輸出（DO），實現機械動作、工藝切換等。
模擬量輸入與輸出（如支持）
采集溫度、壓力、流量等模擬信號，通過A/D轉換轉化為數字?jǐn)?shù)據；
輸出模擬控制信號給執行機構，如閥門調節、電機調速等。
信號隔離與保護
內置光電隔離等電氣保護設計，防止干擾和故障傳播；
支持過壓、過流保護，保障設備運行安全。
與主控制單元通信
通過背板總線或工業現場總線與中央控制器連接，實時傳輸采集數據與控制指令；
支持多模塊組合，滿足復雜設備多路信號管理需求。
英文資料：
The input/output module of TEL Tokyo Electron 3208-000146-11 is a key component of the Tokyo Electron semiconductor equipment control system. It is mainly used to exchange signals between the equipment and external sensors and actuators, collect various input signals for equipment operation, and output control instructions to ensure the accurate execution of the process flow.
1、 Basic Information
Product model: 3208-000146-11
Product Name: I/O Module
Manufacturer: Tokyo Electron Ltd. (TEL)
Module Category: Digital and Analog Signal Acquisition and Output Module
Installation method: Rack plug-in module, integrated into the control cabinet or rack system
2、 Main functions
Digital input and output
Receive digital inputs (DI) from sensors and switch signals, such as limit switches, door control sensors, button status, etc;
Control the digital output (DO) of actuators such as relays and solenoid valves to achieve mechanical actions, process switching, etc.
Analog input and output (if supported)
Collect analog signals such as temperature, pressure, and flow rate, and convert them into digital data through A/D conversion;
Output analog control signals to actuators, such as valve adjustment, motor speed regulation, etc.
Signal isolation and protection
Built in electrical protection design such as photoelectric isolation to prevent interference and fault propagation;
Support overvoltage and overcurrent protection to ensure the safe operation of equipment.
Communicate with the main control unit
Connect to the central controller through the backplane bus or industrial fieldbus to transmit real-time collected data and control instructions;
Support multiple module combinations to meet the management needs of complex devices with multiple signals.
2.產 品 展 示
3.其他產品
IS400JPDHG1ABB IS410JPDHG1A軸速度反饋傳感器
4.其他英文產品
A-B 1794-IRT8XT Relay Output Module
ABB XXD129A01 Card Module Controller
| PMB31D-20201-02 | 3BSE019202R1 | PFTL201D 50.0KN |
| PMB31D-20201-01 | AMAT 129-0401 | P2HNSXB-LDF-SS-02 |
| PMB31D-20201-00 | 07KP60R101 | 3BSE004265R1 SV541 |
| PMB31D-20200-03 | 07KT228 | HESG 446917 R1 |
| PMB31D-20200-02 | NKTU011 | 3BSE005881R1 TX560 |
| PMB31D-20200-01 | AMAT 0100-1401 | P22NSXA-LNF-NS-02 |
| PMB31D-20200-00 | AMAT 0100-01415 | 57120001-KN DSTA 133 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.jiangxidcs
