70PR05B-ES線路接口模塊,70PR05B-ES英文說明
通過IMHSS03面板可以看到九個LED。
頂部LED（紅色/綠色）指示通信狀態HSS模塊和多功能處理器模塊之間，以及整體狀態（見圖5-1）。接下來的八個LED（標記為1到8）用于診斷目的。
LED 1、4和8在正常操作期間用于指示參數/校準、輸出的自動調諧禁用和硬手動模式。
70PR05B-ES線路接口模塊表5-1列出了LED各種操作條件的狀態。在診斷模式下，八個紅色LED指示通過/失敗計數或測試編號和狀態（通過/失?。D6-1顯示了診斷LED顯示屏。IMHSS03模塊固件包含診斷例程
可以在通電時調用。診斷例行程序允許驗證模塊組件和電路。
當模塊處于診斷模式時，它無法執行IMHSS03模塊的功能。因此，診斷應在離線的模塊上使用。
There are nine LEDs visible through the IMHSS03 faceplate.
The top LED (red/green) indicates communication status
between the HSS module and multi-function processor module, and overall status (see Figure 5-1). The next eight LEDs
(labeled one through eight) are used for diagnostic purposes.
LEDs one, four and eight are used during normal operation to
indicate automatic tuning of parameters/calibration, outputs
disabled and hard manual mode. Table 5-1 lists the LED
states for various operating conditions. In diagnostics mode,
the eight red LEDs indicate either pass/fail count or test number and status (pass/fail). Figure 6-1 shows the diagnostic
LED display.The IMHSS03 module firmware contains diagnostic routines
that can be invoked from power up. The diagnostic routines
allow verification of the module components and circuitry.
When the module is in diagnostic mode, it cannot perform the
functions of an IMHSS03 module. Therefore, diagnostics
should be used on modules that are off-line.
