IS220PAICH2A 模擬輸入/輸出
1.產 品 資 料 介 紹：
中文資料：
IS220PAICH2A模擬輸入/輸出模塊是一款由通用電氣（General Electric）公司開發的設備，屬于Mark VIe Speedtronic控制系統的一部分。以下是關于該模塊的詳細信息和特點：
- 概述：
- IS220PAICH2A是一個模擬I/O模塊，用于連接現場設備與控制系統，實現模擬信號的輸入和輸出。
- 它能夠?qū)F(xiàn)場由傳感器檢測而產生的連續的模擬量信號轉換成PLC（可編程邏輯控制器）的CPU可以接收的數字量，實現數據的采集和處理。
- 輸入特性：
- 該模塊具有十個模擬輸入通道。
- 前八個輸入通道可設置為5V、10V或4-20mA電流環路輸入。
- 最后兩個輸入通道可設置為1mA或4-20mA電流輸入。
- 電流環路輸入的負載終端電阻器位于端子板上，模塊通過這些電阻器感應電壓。
- 輸出特性：
- PAICH2有兩個電流環路輸出，輸出范圍從0到20mA。
- 它還包括額外的硬件，允許在第一個輸出上實現0-200mA的電流輸出。
- 連接與通信：
- I/O包直接連接到終端板上，通過DC-37引腳連接器進行連接。
- 如果僅安裝一個I/O包，支持TMR（三重冗余）的終端板具有3個DC-37引腳連接器，可以在單工模式下使用。
- I/O包通過雙RJ-45以太網連接器接收和發送數據到控制器，并由一個三針連接器供電。
- 現場設備通過直接連接到相關終端板的DC-37引腳連接器進行通信。
- 功能與應用：
- IS220PAICH2A具有高精度、高穩定性和高可靠性的特點，能夠適應各種惡劣的工作環境。
- 它具有可編程性和可擴展性，能夠與其他工業自動化和控制系統進行集成，實現更高級的功能和應用。
- 該模塊廣泛應用于工業自動化和控制系統，用于溫度、壓力、流量、液位等參數的監測和控制。
- 安裝與配置：
- 安裝時，需要牢固地安裝所選的端子板，并將PAIC I/O包直接插入端子板連接器。
- 使用以太網端口附近的雙頭螺栓以機械方式固定I/O包。
- 根據系統配置，連接一根或兩根以太網電纜，并將I/O包連接到電源。
- 使用ToolboxST應用程序根據需要配置I/O包。
英文資料
The IS220PAICH2A analog input/output module is a device developed by General Electric and is part of the Mark VIe Speedtronic control system. The following is detailed information and features about this module:
Overview:
IS220PAICH2A is an analog I/O module used to connect field equipment and control systems, achieving input and output of analog signals.
It can convert continuous analog signals generated by sensors on site into digital signals that can be received by the CPU of a PLC (Programmable Logic Controller), achieving data acquisition and processing.
Input characteristics:
This module has ten analog input channels.
The first eight input channels can be set as 5V, 10V, or 4-20mA current loop inputs.
The last two input channels can be set to 1mA or 4-20mA current input.
The load terminal resistors of the current loop input are located on the terminal board, and the module induces voltage through these resistors.
Output characteristics:
PAICH2 has two current loop outputs, with an output range from 0 to 20mA.
It also includes additional hardware that allows for a current output of 0-200mA on the first output.
Connection and communication:
The I/O package is directly connected to the terminal board and connected through a DC-37 pin connector.
If only one I/O package is installed, a terminal board that supports TMR (Triple Redundancy) has three DC-37 pin connectors and can be used in simplex mode.
The I/O package receives and sends data to the controller through dual RJ-45 Ethernet connectors, and is powered by a three pin connector.
The on-site equipment communicates through a DC-37 pin connector directly connected to the relevant terminal board.
Features and Applications:
IS220PAICH2A has the characteristics of high precision, high stability, and high reliability, and can adapt to various harsh working environments.
It has programmability and scalability, and can be integrated with other industrial automation and control systems to achieve more advanced functions and applications.
This module is widely used in industrial automation and control systems, for monitoring and controlling parameters such as temperature, pressure, flow rate, liquid level, etc.
Installation and configuration:
When installing, it is necessary to firmly install the selected terminal board and directly insert the PAIC I/O package into the terminal board connector.
Use the double headed bolts near the Ethernet port to mechanically secure the I/O package.
According to the system configuration, connect one or two Ethernet cables and connect the I/O pack to the power supply.
Use the ToolboxST application to configure I/O packages as needed.
2.產 品 展 示
3.產 品 展 示
HONEYWELL 05704-A-0146 DIGITAL
PROSOFT MVI46-MCM COMMUNICATIO
KOLLMORGEN CP310250 伺服驅動器
| PMB33F-20201-03 | DT 370A | R23GENA-R1-NS-VS-01 |
| PMB33F-20101-00 | DT 371A | R43HCNA-NP-RW-VS-03 |
| PMB33F-10216-03 | GJR2 242100 R1 | R45GCNA-TS-NS-NV-00 |
| PMB33F-20201-02 | ABB DSAO120A 3BSE018293R1 | R35KMNC-TS-RC-NV-02 |
| R46GSNA-R2-NS-VS-04 | R32HSNC-TS-NS-NV-02 | R22GENT-TS-NS-NV-02 |
| R65HENA-TS-NS-NV-00 | R43HCBA-R2-NS-VS-00 | R35GENH-R2-NS-NV-00 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:HTTP://www.qing-ting.cn