ABB SDCS-CON2B-2A驅動板

1.產    品     資    料    介    紹：

中文資料：

ABB SDCS-CON2B-2A掃描模式掃描模式確定CPU在掃描期間執行的任務的優先級，并定義分配給每個任務的時間?？梢孕薷牡膮?shù)會隨著掃描模式的選擇而變化。ABB SDCS-CON2B-2A掃描的控制器通信窗口、背板通信窗口和背景窗口階段可以基于PLC掃描模式以各種模式運行。

ABB SDCS-CON2B-2A 選擇：? 正常模式：PLC掃描執行得盡可能快。整個PLC掃描時間取決于邏輯程序和窗口中正在處理的請求，并且等于ABB SDCS-CON2B-2A 執行程序中的邏輯所需的時間加上相應的窗口計時器值。窗口在沒有更多任務要完成時終止。這是默認值。

恒定窗口模式：每個窗口都以“運行到完成”模式運行。PLC在三個窗口之間交替，時間等于為窗口計時器參數設置的值。整個PLC掃描時間等于執行邏輯程序所需的時間加上窗口計時器的值。這個時間可能由于程序邏輯執行中的掃描到掃描的差異而變化。ABB SDCS-CON2B-2A

英文資料：

ABB SDCS-CON2B-2ASweep Mode The sweep mode determines the priority of tasks the CPU performs during the sweep and defines how much time is allotted to each task. The parameters that can be modified vary depending on the selection for sweep mode. The Controller Communications Window, Backplane Communications Window, and Background Window phases of the PLC sweep can be run in various modes, based on the PLC sweep mode.ABB SDCS-CON2B-2A

ABB SDCS-CON2B-2AChoices: ? Normal mode: The PLC sweep executes as quickly as possible. The overall PLC sweep time depends on the logic program and the requests being processed in the windows and is equal to the time required to execute the logic in the program plus the respective window timer values. The window terminates when it has no more tasks to complete. This is the default value.ABB SDCS-CON2B-2A

Constant Window mode: Each window operates in a Run-to-Completion mode. The PLC alternates among three windows for a time equal to the value set for the window timer parameter. The overall PLC sweep time is equal to the time required to execute the logic program plus the value of the window timer. This time may vary due to sweep-to-sweep differences in the execution of the program logic.ABB SDCS-CON2B-2A

2.產      品      展      示      

3.主      營      品      牌      

本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn