TRICONEX 8101擴展機箱如何使用

1.產品詳情資料：

TRICONEX 8101是一種可編程的遠程終端單元（RTU），主要用于工業自動化和過程控制系統。以下是該產品的特點介紹、使用方法和參數規格：

特點介紹：

支持多種通信協議，包括Modbus RTU/TCP、DNP3、IEC 60870-5-101/104等；
可以連接多種傳感器、執行器和控制器，實現多種輸入/輸出（I/O）功能；
具有高度的可編程性和靈活性，可以通過編寫程序來實現特定的控制和監測功能；
具有高可靠性和安全性，支持多種冗余和備份機制，以及安全認證和訪問控制功能。

使用方法：

將TRICONEX 8101安裝在需要監測和控制的現場位置，通過通信網絡（如串口、以太網）連接到中央控制室或數據中心；
根據實際需求，配置模塊上的輸入/輸出模塊和通信模塊，編寫程序實現特定的控制和監測功能；
監測和控制過程可以通過中央控制室的軟件界面進行實時監控和調整。

參數規格：

支持的通信協議：Modbus RTU/TCP、DNP3、IEC 60870-5-101/104；
輸入/輸出模塊：最多支持32個數字輸入/輸出通道，16個模擬輸入/輸出通道；
通信接口：支持RS-232、RS-485、以太網等多種接口；
工作溫度范圍：-40℃至+70℃；
電源要求：24V DC或48V DC；
外形尺寸：133mm x 157mm x 47mm。

TRICONEX 8101 is a programmable remote terminal unit (RTU), mainly used in industrial automation and process control systems. The following are the features, use methods and parameter specifications of the product:

Features:

Support a variety of communication protocols, including Modbus RTU/TCP, DNP3, IEC 60870-5-101/104, etc;

It can connect various sensors, actuators and controllers to realize various input/output (I/O) functions;

It has high programmability and flexibility, and can realize specific control and monitoring functions through programming;

It has high reliability and security, supports multiple redundancy and backup mechanisms, as well as security authentication and access control functions.

usage method:

Install TRICONEX 8101 at the site where monitoring and control are required, and connect it to the central control room or data center through communication network (such as serial port and Ethernet);

According to the actual needs, configure the input/output module and communication module on the module, and write programs to achieve specific control and monitoring functions;

The monitoring and control process can be monitored and adjusted in real time through the software interface in the central control room.

Parameter specification:

Supported communication protocols: Modbus RTU/TCP, DNP3, IEC 60870-5-101/104;

Input/output module: support up to 32 digital input/output channels and 16 analog input/output channels;

Communication interface: support RS-232, RS-485, Ethernet and other interfaces;

Operating temperature range: - 40 ℃ to+70 ℃;

Power requirements: 24V DC or 48V DC;

Overall dimension: 133mm x 157mm x 47mm.

2.產品展示

微信圖片_20230313095227_副本.jpg