NI PXI-2798高性能多路開關模塊
1.產 品 資 料 介 紹：
中文資料：
NI PXI-2798是一種高性能多路開關模塊，可用于NI PXI平臺上的測試和測量應用。以下是有關PXI-2798的配置說明、功能和應用領域的概述：
配置說明：
- PXI-2798采用PXI總線連接，并插入PXI機箱中的一個插槽。
- 它具有多個獨立的開關通道，可以配置為不同的連接方式。
- 每個開關通道都帶有兩個輸入和一個輸出端口，可以用于連接測試設備或測量儀器。
功能和作用：
信號路由：PXI-2798允許根據需要在不同設備之間切換信號路徑。這對于測試和測量系統中的信號切換和路由非常有用。它可以幫助簡化測試配置，提高系統靈活性。
信號切換：它可以在測試過程中切換不同的輸入和輸出信號，以便對被測設備或電路進行多種測試方案。通過改變開關通道的配置，可以快速切換不同的測量信號。
通道擴展：PXI-2798可以用作通道擴展模塊，允許將多個測試設備或傳感器連接到單個測試系統。這樣可以簡化系統架構，并減少所需的硬件組件數量。
應用領域：
自動測試設備（ATE）：PXI-2798常用于自動測試設備中，用于連接被測設備和測試儀器之間的信號通路切換。它可以幫助提高測試效率和自動化程度。
儀器控制和測量：在實驗室和研發環境中，PXI-2798可用于儀器控制和信號路由。它可以方便地切換不同的測試信號源和測量儀器，以支持各種測量和分析需求。
數據采集和監控系統：對于需要監控和采集多個信號源或傳感器的應用，PXI-2798可用于切換和路由不同的信號通路，以便進行數據采集、監控和分析。
英文資料：
NI PXI-2798 is a high-performance multi-channel switch module that can be used for testing and measurement applications on the NI PXI platform. The following is an overview of the configuration instructions, functions, and application areas of PXI-2798:
Configuration instructions:
PXI-2798 uses a PXI bus connection and is inserted into a slot in the PXI chassis.
It has multiple independent switch channels and can be configured for different connection modes.
Each switch channel has two input and one output port, which can be used to connect testing equipment or measuring instruments.
Function and function:
Signal routing: PXI-2798 allows switching signal paths between different devices as needed. This is very useful for signal switching and routing in testing and measuring systems. It can help simplify testing configurations and improve system flexibility.
Signal switching: It can switch different input and output signals during the testing process, in order to carry out multiple testing schemes on the tested equipment or circuit. By changing the configuration of the switch channel, different measurement signals can be quickly switched.
Channel Expansion: PXI-2798 can be used as a channel expansion module, allowing multiple testing devices or sensors to be connected to a single testing system. This can simplify the system architecture and reduce the number of required hardware components.
Application field:
Automatic Test Equipment (ATE): PXI-2798 is commonly used in automatic test equipment to switch signal paths between the tested equipment and the testing instrument. It can help improve testing efficiency and automation.
Instrument control and measurement: PXI-2798 can be used for instrument control and signal routing in laboratories and research and development environments. It can easily switch between different test signal sources and measuring instruments to support various measurement and analysis needs.
Data acquisition and monitoring system: For applications that require monitoring and collecting multiple signal sources or sensors, PXI-2798 can be used to switch and route different signal paths for data acquisition, monitoring, and analysis.
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
