NI PXI-6239多通道數據采集和控制模塊
1.產 品 資 料 介 紹：
中文資料：
NI PXI-6239是一款多通道數據采集和控制模塊，屬于National Instruments（NI）公司的產品系列之一。以下是對其產品特點、使用方法和參數詳情的介紹：
產品特點：
- 多通道數據采集：PXI-6239提供了32個模擬輸入通道和48個數字I/O通道，可同時采集多個信號或控制多個外部設備。
- 高速數據采集：模塊支持高達400 kS/s的模擬采樣速率，可滿足對高速信號的采集需求。
- 精準時鐘同步：具備高精度的時鐘同步功能，可確保多個模塊之間的數據采集和控制同步。
- 靈活的觸發機制：支持多種觸發模式，包括軟件觸發、硬件觸發和數字邊沿觸發等，可根據具體應用需求進行配置。
- FPGA可編程性：模塊內置FPGA芯片，可通過LabVIEW FPGA編程進行定制化的數據處理和控制。
- 多種接口：PXI-6239支持PCIe總線接口，可與PXI平臺或計算機連接，方便進行數據傳輸和控制。
使用方法：
- 連接：將PXI-6239模塊插入到合適的PXI槽位或PCIe插槽中，并確保連接穩固。
- 驅動安裝：安裝適用于PXI-6239的NI驅動和軟件，確保系統能夠正常識別和操作該模塊。
- 配置參數：使用NI提供的開發環境（如LabVIEW或NI-DAQmx）進行配置，設置模擬輸入范圍、采樣率、觸發模式等參數。
- 數據采集和控制：編寫相應的代碼或使用可視化開發工具進行數據采集和控制應用程序的開發，利用模塊提供的API進行數據讀取、寫入和控制操作。
- 數據處理和分析：根據具體應用需求，對采集到的數據進行處理、分析和可視化展示。
參數詳情：
- 模擬輸入通道：32個單端或16個差分通道
- 模擬輸入范圍：可配置為±10V、±5V、±2V、±1V
- 模擬輸入分辨率：16位
- 模擬輸入采樣率：最大400 kS/s（單通道）
- 數字I/O通道：48個
- 數字I/O電平：可配置為TTL或LVTTL電平
- 數字I/O采樣率：最大10 MS/s
英文資料：
NI PXI-6239 is a multi-channel data acquisition and control module that belongs to the product line of National Instruments (NI). The following is an introduction to its product features, usage methods, and parameter details:
Product features:
Multi channel data acquisition: PXI-6239 provides 32 analog input channels and 48 digital I/O channels, which can simultaneously collect multiple signals or control multiple external devices.
High speed data acquisition: The module supports an analog sampling rate of up to 400 kS/s, which can meet the requirements for high-speed signal acquisition.
Accurate clock synchronization: With high-precision clock synchronization function, it can ensure data collection and control synchronization between multiple modules.
Flexible triggering mechanism: Supports multiple triggering modes, including software triggering, hardware triggering, and digital edge triggering, which can be configured according to specific application requirements.
FPGA programmability: The module is equipped with an FPGA chip, which can be customized for data processing and control through LabVIEW FPGA programming.
Multiple interfaces: PXI-6239 supports PCIe bus interfaces and can be connected to PXI platforms or computers for convenient data transmission and control.
usage method:
Connection: Insert the PXI-6239 module into a suitable PXI slot or PCIe slot and ensure a secure connection.
Driver installation: Install the NI driver and software suitable for PXI-6239 to ensure that the system can recognize and operate the module normally.
Configuration parameters: Use the development environment provided by NI (such as LabVIEW or NI-DAQmx) for configuration, and set parameters such as analog input range, sampling rate, trigger mode, etc.
Data collection and control: Write corresponding code or use visual development tools to develop data collection and control applications, and use the API provided by the module for data reading, writing, and control operations.
Data processing and analysis: Process, analyze, and visualize the collected data according to specific application requirements.
Parameter details:
Analog input channels: 32 single ended or 16 differential channels
Analog input range: configurable to ± 10V, ± 5V, ± 2V, ± 1V
Analog input resolution: 16 bits
Analog input sampling rate: maximum 400 kS/s (single channel)
Digital I/O channels: 48
Digital I/O level: configurable as TTL or LVTTL level
Digital I/O sampling rate: maximum 10 MS/s
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
