B&R 5AP1120.1214-000自動化面板
1.產 品 資 料 介 紹：
中文資料：
5AP1120.1214-000是貝加萊設計和制造的AP1000自動化面板。它配備熱傳感器，形成溫度監控系統，以防止熱量損壞。它的正面還有一個12 英寸 1 單點觸控模擬電阻式顯示屏和一個USB 2.0 接口。此 USB 接口采用Type A 設計，傳輸速率高達480 Mbit/s。此外，它的最大載流能力為500mA。貝加萊自動化面板的橫向格式顯示具有SVGA 分辨率. 根據 UL 50，該面板的前部也非常適合Type 4X 室內使用。
根據 EN 60529，5AP1120.1214-000的防護等級為正面IP 65和背面IP 20 。這意味著灰塵或噴霧不可能從面板的正面滲入。但是，只有12mm或更大的固體外來物體才能防止從背面進入。操作此自動化面板需要24V DC的標稱電壓和±25%的公差和3A的最大標稱電流。根據 EN 61131-2，它屬于II 類過電壓。
英文資料：
5AP1120.1214-000 is an AP1000 automation panel designed and manufactured by Baccarat. It is equipped with thermal sensors to form a temperature monitoring system to prevent heat damage. It also has a 12 inch 1-point touch analog resistive display screen and a USB 2.0 interface on the front. This USB interface adopts Type A design, with a transfer rate of up to 480 Mbit/s. In addition, its maximum current carrying capacity is 500mA. The horizontal format display of the Baccarat automation panel has SVGA resolution According to UL 50, the front of this panel is also very suitable for indoor use in Type 4X.
According to EN 60529, the protection level of 5AP1120.1214-000 is front IP 65 and back IP 20. This means that dust or spray cannot penetrate from the front of the panel. However, only solid foreign objects of 12mm or larger can prevent entry from the back. Operating this automation panel requires a nominal voltage of 24V DC with a tolerance of ± 25% and a maximum nominal current of 3A. According to EN 61131-2, it belongs to category II overvoltage.
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
