ALSTOM N897164611M數字量控制板卡
1.產 品 資 料 介 紹：
中文資料：
ALSTOM N897164611M限額是按目標計算的，因此所有生產商和消費者都計入該限額。60 ALSTOM N897164611M（固件版本9.30或更高版本）通過嵌入式PROFINET控制器為MRP提供PROFINET支持：不需要外部硬件。61本出版物發(fā)布時不支持。簡介EPSCPE100是RSTi EP系列中的第一個獨立CPU。它由兩種安裝選項支持：1）出廠時，它使用DIN導軌適配器板安裝在DIN導軌上。2） 或者，它使用面板安裝適配器板ALSTOM N897164611M直接安裝在機柜中。安裝說明和電源要求記錄在《快速入門指南》GFK3012中，此處不復制。ALSTOM N897164611M，是一款性能增強的獨立可編程控制器，配備1MB用戶內存和四個以太網端口，用于運行實時確定性控制應用程序。LAN1專用于高速以太網，LAN2由3個交換端口組成，可配置為第二個嵌入式以太網控制器或嵌入式PROFINET控制器，提供PROFINET功能，僅支持單工操作模式。它是一個獨立的PLC，支持分布式I/O。ALSTOM N897164611M
英文資料：
ALSTOM N897164611MLimit is per target, so all producers and consumers are counted towards this limit. 60 CPE100 (firmware version 9.30 or later) provide PROFINET support with MRP via an embedded PROFINET Controller: no external hardware is required. 61 Not supported at the time of this publication.Introduction The EPSCPE100 is the first standalone CPU in the ALSTOM N897164611M family. It is supported by two mounting options: 1) As shipped, it mounts onto a DIN rail using a DIN-rail adaptor plate. 2) Alternately, it mounts directly in a cabinet, using a panel-mount adaptor plate ALSTOM N897164611M. The mounting instructions and power requirements are documented in the Quick Start Guide, GFK3012, and are not replicated here.The PACSystems* RSTi-EP EPSCPE100, is an enhanced performance standalone programmable controller equipped with 1MB of user memory and four Ethernet ports to run real time deterministic control applications. LAN1 is dedicated to high speed Ethernet and LAN2 is comprised of 3 switched ports configurable as either a second embedded Ethernet controller or an embedded PROFINET controller, which provides the PROFINET functionality and supports only simplex mode of operation. It is a standalone PLC that supports distributed I/O.ALSTOM N897164611M
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
