SST SST-ESR2-CPX-P工控控制卡件
1.產 品 介 紹
品牌：SST
型號：SST SST-ESR2-CPX-P
產品說明：工控控制卡件
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
SST SST-ESR2-CPX-P工控控制卡件可選使用隔離+24伏電源輸出；然而，該輸出可用于驅動有限數量的輸入設備。電源的最大總功率輸出額定值為30瓦；然而，根據電源目錄號，單個+5VDC輸出可以額定為15瓦或30瓦。詳見表12-1“電源特性比較表”。SST SST-ESR2-CPX-P硬件組件的負載要求下表顯示了每個模塊和硬件組件所需的DC負載。所有額定值均以毫安為單位（除非另有說明）。輸入和輸出模塊電流額定值為所有輸入或輸出打開時的額定值。表中列出了三個電壓：VDC提供主電源以操作大多數內部電路繼電器電源為驅動繼電器模塊上繼電器的電路供電+24 VDC隔離提供電源以操作多個輸入電路（僅限輸入模塊），SST SST-ESR2-CPX-P以及連接到電源端子板上的24 VDC輸出端子的任何外部電路。請注意，下表中列出的數字是最大（最壞情況）要求，而不是典型要求。SST SST-ESR2-CPX-P
Use of the Isolated +24 Volt power supply output is optional; however, this output can be used to drive a limited number of input devices. The maximum total power output rating of the Power Supplies is 30 watts; however, the individual +5VDC outputs can be rated for either 15 or 30 Watts, depending on the Power Supply catalog number. See Table 12-1, “SST SST-ESR2-CPX-PPower Supply Feature Comparison Table,” for details. Load Requirements for Hardware Components The following table shows the DC load required by each module and hardware component. All ratings are in milliamps (except where noted).SST SST-ESR2-CPX-P Input and Output module current ratings are with all inputs or outputs on. Three voltages are listed in the table:VDC provides primary power to operate most internal circuits Relay Power provides power for circuits that drive the relays on Relay modules +24 VDC Isolated provides power to operate a number of input circuits (input modules only), and any external circuits connected to the 24 VDC Output terminals on the power supply terminal strip. Note that the figures listed in the following table are maximum (worst case) requirements , not typical requirements.SST SST-ESR2-CPX-P
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
