HIMA F7130A電源模塊
1.產 品 介 紹
品牌：HIMA
型號：HIMA F7130A
產品說明：電源模塊
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
HIMA F7130A電源模塊接線圖以下接線圖顯示了I/O擴展系統電纜的接線配置。為點對點電纜和Y形電纜提供了接線圖。注意：在遠程基板HIMA F7130（及更早版本）和HIMA F7130（及更早）中，有必要移除電纜插入基板的配合電纜的引腳1。這意味著，當使用工廠制造的Y形電纜HIMA F7130時，必須在將引腳1與其中一個基板一起使用之前，將其從插入遠程基板的陽端斷開。這些底板的定制Y形電纜應使用圖10-20制作。有關更多詳細信息，請參閱“早期遠程底板版本的用戶警報”一節。遠程底板HIMA F7130及更高版本）和HIMA F7130（及更新版本）在底板內部進行了更改，從而減少了從配套電纜上拆下銷1的需要。當將工廠制造的Y形電纜與這些底板一起使用時，無需從電纜上拆下銷1。可使用圖10-20或圖10-21為這些底板定制Y形電纜。圖10-21顯示了工廠制造的Y形電纜的制造方法
Wiring Diagrams The following wiring diagrams show the wiring configuration for I/O expansion system cables. Wiring diagrams are provided for both point-to-point cables and Wye cables.Note: In remote baseplates, HIMA F7130(and earlier) andHIMA F7130(and earlier), it is necessary to remove pin 1 of the mating cable where the cable plugs into the baseplate. This means that when using a factory made Wye cable,HIMA F7130, you must break pin 1 out of the male end where it plugs into the remote baseplate before using it with one of these baseplates. Custom built Wye cables for these baseplates should be built using Figure 10-20. See the section “Alert to Users of Early Remote Baseplate Versions” for more details.Remote baseplatesHIMA F7130 (and later( andHIMA F7130 (and later) have a change inside the baseplate which alleviates the need to remove pin 1 from the mating cable. When using factory made Wye cable with these baseplates, it is not necessary to remove pin 1 from the cable. Custom built Wye cables for these baseplates can be made using either Figure 10-20 or Figure 10- 21. Figure 10-21 shows how the factory made Wye cable are made.
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.qing-ting.cn
