GESPAC GESMFI-1多功能接口卡
GESPAC GESMFI-1短軸終點（C）單擊其中一個框，然后在圖形窗口中單擊橢圓短軸的終點，將值傳輸?shù)蕉梯S終點框。起始角度（α）指定從長軸測量的弧的起始角度。結束角（β）指定從長軸測量的弧的結束角。參考選擇所有位置或點將與之相關的參考坐標系。中心點（A）單擊其中一個“中心點”框，然后單擊圖形窗口中的中心點，GESPAC GESMFI-1將值傳遞到“中心點框”。長軸端點（B）單擊其中一個框，然后在圖形窗口中單擊橢圓長軸的端點，將值傳輸?shù)介L軸端點框。次半徑（C）指定橢圓短軸的長度。將創建與長軸垂直的小半徑。參考選擇所有位置或點將與之相關的參考坐標系。起點（A）單擊其中一個框，然后單擊圖形窗口中的起點，將值傳輸?shù)狡瘘c框。矩形將在正坐標方向上創建。GESPAC GESMFI-1
GESPAC GESMFI-1多功能接口卡
Minor Axis End Point (C) Click in one of these boxes, and then click the end point for the minor axis of the ellipse in the graphics window to transfer the values to the Minor Axis End Point boxes. Start Angle (α) Specify the start angle for the arc, measured from the major axis. End Angle (β) Specify the end angle for the arc, measured from the major axis.Reference Select the Reference coordinate system to which all positions or points will be related. Center Point (A) Click in one of the Center Point boxes, and then click the center point in the graphics window to transfer the values to the Center Point boxes. Major Axis End Point (B) Click in one of these boxes, and then click the end point for the major axis of the ellipse in the graphics window to transfer the values to the Major Axis End Point boxes. Minor Radius (C) Specify the length of the minor axis of the ellipse. The minor radius will be created perpendicular to the major axis.Reference Select the Reference coordinate system to which all positions or points will be related. Start Point (A) Click in one of these boxes, and then click the start point in the graphics window to transfer the values to the Start Point boxes. The rectangle will be created in the positive coordinate directions.GESPAC GESMFI-1
公司主營優勢
應用行業
