GESPAC GESCIO-1電路板
GESPAC GESCIO-1參考選擇與所有位置或點相關的參考坐標系。角點（A）該點將是長方體的局部原點。鍵入位置，或單擊其中一個框，然后在圖形窗口中選擇該點。在XY平面的對角線上點（B）該點是角點，與本地原點成對角線。它設置局部坐標系的X和Y方向，以及沿這些軸的長方體尺寸。鍵入位置，或單擊其中一個框，然后在圖形窗口中選擇點。指示點Z軸（C）該點是本地原點上方的角，它設置本地坐標系的Z方向，以及沿Z軸的長方體尺寸。鍵入位置，或單擊其中一個框，然后在圖形窗口中選擇點。參考選擇所有位置或點將關聯(lián)的參考坐標系?；鶞手行狞c（GESPAC GESCIO-1A）單擊其中一個框，然后單擊圖形窗口中的中心點，將值傳遞到基準中心點框，或鍵入位置。中心點將是圓錐體的局部原點。方向如果對象應相對于參考坐標系旋轉，請指定旋轉。半徑（B）指定圓錐體的半徑。直徑指定圓錐體的直徑。高度（C）指定圓錐體的高度。GESPAC GESCIO-1
GESPAC GESCIO-1電路板
Reference Select the Reference coordinate system to which all positions or points will be related. Corner Point (A) This point will be the local origin of the box. Either type the position, or click in one of the boxes and then select the point in the graphics window.oint on diagonal of XYplane (B) This point is the the corner, diagonal to the local origin. It sets the X and Y directions of the local coordinate system, as well as the dimension of the box along these axes. Either type the position, or click in one of the boxes and then select the point in the graphics window. Indication Point Z-axis (C) This point is the corner above the local origin, It sets the Z direction of the local coordinate system, as well as the dimension of the box along the Z axis. Either type the position, or click in one of the boxes and then select the point in the graphics window.Reference Select the Reference coordinate system to which all positions or points will be related. Base Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Base Center Point boxes, or type the position. The center point will be the local origin of the cone. Orientation If the object shall be rotated relative to the reference coordinate system, specify the rotation. Radius (B) Specify the radius of the cone. Diameter Specify the diameter of the cone. Height (C) Specify the height of the cone.GESPAC GESCIO-1
公司主營優(yōu)勢
應用行業(yè)
