FOXBORO FBM206 P0916CQ控制器模塊
如前所述，典型的系統包括VMIVME-7750，其駐留的閃存磁盤配置為次要IDE設備、連接到主要IDE接口的硬盤驅動器和連接到軟盤接口的軟盤驅動器。使用此配置，可能需要在任一IDE設備上具有邏輯設備，配置為可引導設備，允許通過高級CMOS設置屏幕選擇第一個引導設備。使用此功能，用戶可以使系統配置有多個操作系統，通過將IDE邏輯設備指定為引導設備，可以選擇這些操作系統。DOS實用程序FDISK通常用于配置硬盤驅動器上的分區結構。下一頁的注釋與使用FDISK進行分區有關。注意：刪除分區將擦除以前存儲在該分區中的所有數據。
As discussed earlier, a typical system consists of the VMIVME-7750 with its resident
Flash Disk configured as the Secondary IDE device, a hard drive attached to the
Primary IDE interface, and a floppy drive attached to the floppy interface.
Using this configuration, it may be desirable to have a logical device on either IDE
device, configured as a bootable device, allowing the selection of the first boot device
by way of the Advanced CMOS Setup screen. Using this capability, a user could have
a system configured with multiple operating systems that would be selectable by
assigning the IDE logical device as the boot device.
The DOS utility FDISK is commonly used to configure the partition structure on a
hard drive. Comments on the following page pertain to partitioning efforts using
FDISK.
CAUTION: Deleting a partition will erase all the data previously stored in that
partition.
