FOXBORO FBM218 P0922VW冗余輸出模塊
要在分組中選擇信息，請按。要退出子組，請按訪問上一條消息或轉到下一個子組。SETPOINT message message]]SETPOINTS]]S2系統設置設置點MODBUS通信地址：1 COM1波特率：9600 BAUD message MISSAGE COM 1 PARITY：無消息▲ 消息▼ 消息▲ 消息▼ M E S S A G E在子組內向前移動子組內向后移動到下一個子組移動到上一個子組消息消息消息。VSD注意：亮度設定值僅對包含真空熒光顯示器（VFD）的舊硬件版本的PQM有影響，默認信息時間1.0分鐘默認信息亮度：使用和鍵輸入60%值鍵設定值。當顯示要求是/否響應的設置點時，每次按下或時，“是”變?yōu)椤胺瘛?，或“否”變?yōu)闉椤笆恰?/p>
To select messages within a subgroup press . To back out of the subgroup, press to access the previous message or to go to the next subgroup.SETPOINT MESSAGE MESSAGE ]] SETPOINTS ]] S2 SYSTEM SETUP SETPOINT MODBUS COMMUNICATION ADDRESS: 1 COM1 BAUD RATE: 9600 BAUD MESSAGE MESSAGE COM 1 PARITY: NONE MESSAGE ▲ MESSAGE ▼ MESSAGE ▲ MESSAGE ▼ M E S S A G E MOVES FORWARD WITHIN SUBGROUP MOVES BACK WITHIN SUBGROUP MOVES TO NEXT SUBGROUP MOVES TO PREVIOUS SUBGROUP MESSAGE MSGKEYOP.VSD NOTE: The brightness setpoint only has an effect on PQMs with older hardware revisions that include a vacuum flourescent display (VFD), not a liquid crystal display (LCD).DEFAULT MESSAGE TIME 1.0 MINUTES DEFAULT MESSAGE BRIGHTNESS: 60% Value Keys Setpoint values are entered using the and keys. When a setpoint is displayed calling for a yes/no response, each time or is pressed, the "Yes" becomes a "No," or the "No" becomes a "Yes."
轉載請附上此鏈接：http://www.qing-ting.cn/
