MVME162-013A自動化模塊備件
發射器LED：可見660 nm 1030V 35 mA取決于所選的玻璃或塑料光纖，光NPN和PNP 200 mA 1 ms 3 m電纜42SRF-6102 4針微光Powe請參見下文了解線組和附件。線組和配件描述描述描述2米（6.5英尺）4針微型線組889D-F4-2安裝襯套60-2618 76（3英寸）直徑反射器92--39 2米（6.5ft）4針小型線組889R-F4AEA--2直角反射器60-2052 32（1.25英寸）直徑反射鏡92--47光電傳感器請?jiān)L問我們的網站：.ab/catalogs。1--251首選可用性類別。編號以粗體打印。與小孔徑傳感器一起使用的玻璃纖維光纜第1-2521-257頁上的玻璃纖維電纜用于小孔徑傳感器。接收器小孔徑2.2（0.09英寸）直徑發射器2.2（0.09英寸）直徑。光纖控制尖端2.2（0.09英寸）直徑。光纖控制尖端小孔徑2.2（0.09英寸）直徑。45Fxx--xxxx-xxxx-42GxF-910x小孔徑傳感器：42SRF-61xx 42SRF-63xx，帶61-6374適配器42GTGF--101x0 42xRF--5x00FO，帶61-6474適配器42GxF-910x 42KL--L2xxx 42SMF-71xx 45FVL-xxxx45FSL-xxxx注：標稱傳感距離?由于光纖電纜之間的差異，傳感距離可能變化很大?公布的數字基于廣泛的測試，并且是保守的?分叉電纜的傳感距離用白皮書測量（90%反射率）。其他沖浪可能反射性較低，因此感應距離較短。?傳輸光束電纜的傳感距離是從尖端到尖端測量的?影響距離的應用考慮因素?選擇的傳感器?目標的反射率?環境?附件，如測距透鏡?咨詢產品支持以獲取更多信息。所示尺寸均為典型尺寸。小孔徑傳感器用玻璃光纖電纜[2.2（0.09英寸）]安裝說明PHOTOSwitcher系列6000通用pt重要事項：保存這些說明以備將來使用。說明6000系列光電傳感器在pt pkage中提供可靠的通用感測。Eh 6000系列傳感器具有單個輸出指示器。透射光束光源具有電源指示器。Eh傳感器有一個離合器保護的四圈調節電位計。Eh傳感器可配備3米（9.8英尺）四或五根PVC電纜，或在300（12英寸）長電纜（“尾光纖”）末端配備4針或微型快速斷開接頭。低壓傳感器具有NPN和PNP輸出，輸出電流為200ma。典型響應為1ms，有兩個/版本可用。20-132V/傳感器提供單個300mA功率MOSFET輸出。20-264V/傳感器提供單個150mA功率MOSFET輸出。所有6000系列傳感器的亮操作或暗操作由目錄號選擇。特點S pt圓柱形封裝S廣泛的傳感模式選擇S通用電源電壓型號S NPN或PNP輸出（）一般規格光源紅外880nm或可見650nm單位保護反極性，假脈沖電源電壓10-30V；20--132V/；20-264V/電流消耗35mA最大輸出類型NPN和PNP（）；MOSFET（/）輸出模式亮或暗由型號外殼材料Noryl透鏡材料丙烯酸LED指示燈操作：打開（或點亮）時，傳感器輸出被激活；當黑暗時，它關閉。連接類型3m 300V電纜，4針微型，4針微提供的附件安裝套件#129--106--1和129-106--2工作環境IP67
Emitter LED: Visible 660 nm 1030V 35 mA Depends on Glass or Plastic Fiber Optics selected Light NPN and PNP 200 mA 1 ms 3 m cable 42SRF--6102 4-pin micro Light Powe See below for cordsets and cessories. Cordsets and cessories Description Description Description 2 m (6.5 ft) 4-pin Micro Cordset 889D--F4--2 Mounting Brkets 60--2618 76 (3 in.) Diameter Reflector 92--39 2 m (6.5 ft) 4-pin Micro Cordset 889R--F4AEA--2 Right Angle Reflector 60--2052 32 (1.25 in.) Diameter Reflector 92--47 Photoelectric Sensors Visit our website: .ab./catalogs. 1--251 Prefer availability cat. nos. are printed in bold. Glass Fiber Optic Cables for use with Small Aperture Sensors The glass fiber optic cables cables on pages 1--2521--257 are for use with small aperture sensors. Receiver Small Aperture 2.2 (0.09 in.) Diameter Transmitter 2.2 (0.09 in.) Dia. Fiber Control Tips 2.2 (0.09 in.) Dia. Fiber Control Tips Small Aperture 2.2 (0.09 in.) Dia. 45Fxx--xxxx--xx 42GxF--910x Small Aperture Sensors: 42SRF--61xx 42SRF--63xx with 61--6374 adaptor 42GTGF--101x0 42xRF--5x00FO with 61--6374 adaptor 42GxF--910x 42KL--L2xxx 42SMF--71xx 45FVL--xxxx 45FSL--xxxx Note: Nominal Sensing Distance ? Due to the variation between fiber optic cables, sensing distance can vary widely ? The published numbers are based on extensive testing and are conservative ? The sensing distance of bifurcated cables is measu with white paper (90% reflectivity). Other surfes may be less reflective and therefore would have shorter sensing distances. ? The sensing distance of transmitted beam cables is measu from tip to tip ? Application considerations that effect distance ? Sensor selected ? Reflectivity of target ? Environment ? cessories such as range extending lenses ? Consult with product support for additional information. All dimensions indicated are typical. Glass Fiber Optic Cables Cables for Small Aperture Sensors [2.2 (0.09 in.)]Installation Instructions PHOTOSWITCHr Series 6000 General Purpose pt IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE. Description Series 6000 photoelectric sensors provide reliable general purpose sensing in a pt pkage. Eh Series 6000 sensor has a single output indicator. The Transmitted Beam Light Source has a power indicator. Eh sensor has a clutch-protected four-turn adjustment potentiometer. Eh sensor can be supplied with a 3m (9.8ft) four or five PVC cable or with a 4-pin or micro-style quick disconnect on the end of a 300 (12in) length cable (“pigtail”). Low voltage sensors have both NPN and PNP outputs with 200ma output for eh. Typical response is 1ms Two / versions are available. The 20--132V / sensor offers a single 300mA Power MOSFET output. The 20--264V / sensor offers a single 150mA Power MOSFET output. Light operate or dark operate is selected by catalog number for all Series 6000 sensors. Features S pt cylindrical pkage S Wide selection of sensing modes S Universal supply voltage models S Both NPN or PNP outputs () General Specifications Light Source Infra 880nm or visible 650nm Unit Protection Reverse Polarity, False Pulse Supply Voltage 10--30V ; 20--132V /; 20--264V / Current Consumption 35mA maximum Output Type Both NPN and PNP (); MOSFET (/) Output Mode Light or dark operate by model Housing Material Noryl Lens Material rylic LED Indicators : When on (or illuminated) the sensor output is tivated; when dark it is off. Connection Types 3m 300V cable, 4-pin micro , 4-pin micro Supplied cessories Mounting kit #129--106--1 and 129--106--2 Operating Environment IP67
