產品內容介紹
HMW NMI-9283-90 A144942終端顯示器
本指南中提及的施耐德電氣品牌和施耐德電器股份有限公司及其子公司的任何商標均為施耐德電機股份有限公司或其子公司的財產。所有其他品牌可能是其各自所有者的商標。本指南及其內容受適用版權法保護，僅供參考。未經施耐德電氣事先書面許可，不得以任何形式或方式（電子、機械、影印、錄音或其他方式）出于任何目的復制或傳播本指南的任何部分。Schneider Electric不授予任何商業使用指南或其內容的權利或許可，但“按原樣”查閱指南的非排他性個人許可除外。施耐德電氣產品和設備只能由合格人員安裝、操作、維修和維護。由于標準、規范和設計不時發生變化，本指南中包含的信息可能會隨時更改，恕不另行通知。在適用法律允許的范圍內，施耐德電氣及其子公司不對本材料信息內容中的任何錯誤或遺漏，或因使用本文所含信息而產生的后果承擔任何責任或義務。?？怂共_酒店? DCS標準200系列電源為標準200系列基板提供24 V DC。FPS400-24型是一種400 W電源，經機構認證可用于2類和2區應用。提供兩種不同的輸入電壓電源：?120/240 V AC或125 V DC輸入（P0922YU）?24 V DC輸入。這些電源是唯一經Foxboro DCS測試和鑒定可用于200系列現場總線模塊（FBM）的電源。對于需要比FPS400-24電源更低功率和/或更小尺寸的解決方案的站點，可以使用FPS240-24和FPS120-24電源。它們在200系列電源-FPS240-24和FPS120-24（PSS 41H-2FPS）中討論
寬范圍輸入電壓
高效輸入電路自動接受交流或直流輸入電壓。120/240 V AC或125 V DC輸入電路（P0922YU）在47至63 Hz的工作頻率下提供85至265 V AC的范圍（或108至145 V DC），以滿足世界范圍內的電源要求。24 V DC電源輸入電路（P0922YC）可接受18 V DC至35 V DC的范圍。高效密封電源效率高（P0922YU高達95%，P0922Y高達81%），可靠性高，故障率低?；谄骄娰M和負荷，他們的投資回報率（ROI）不到兩年。?廣泛的交流和直流輸入電壓?高效?功率因數校正?雙級限流?過壓關閉電路?變壓器隔離24 V直流輸出?1級，2類，2區應用?UL?，UL-C和CENELEC認證?惡劣環境下的G3等級?外部現場設備的電源?對流冷卻（無風扇）?帶墊圈和密封外殼?水平或垂直DIN導軌安裝?支架或壁裝孔?繼電器（C型）狀態報警輸出功率因數校正電路交流輸入的先進設計（P0922YU）提供了一個有源正弦電流曲線用于近單位控制功率因數。電流限制電源作為恒壓電源運行，具有規范中列出的最大額定負載。如果在額定25°C負載下，負載電流試圖超過最大電流的110%，輸出電壓開始向零下降，從而限制輸送到負載的電流。過載消除后，恢復正常運行。
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners. This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of Schneider Electric. Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an "as is" basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel. As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice. To the extent permitted by applicable law, no responsibility or liability is assumed by Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.The Foxboro? DCS Standard 200 Series power supplies provide 24 V DC to standard 200 Series baseplates. The Model FPS400-24 is a 400 W power supply that is agency certified for use in Division 2 and Zone 2 applications. Two different input voltage power supplies are offered: ? 120/240 V AC or 125 V DC input (P0922YU) ? 24 V DC input (P0922YC). These power supplies are the only power supplies that have been tested and qualified by Foxboro DCS for use with 200 Series Fieldbus Modules (FBMs). For sites where a lower-powered and/or smaller sized solution than the FPS400-24 power supply is desired, the FPS240-24 and FPS120-24 power supplies are available. They are discussed in 200 Series Power Supplies - FPS240-24 and FPS120-24 (PSS 41H-2FPS)
Wide-range Input Voltages
A high-efficiency input circuit automatically accepts either ac or dc input voltages. The 120/240 V AC or 125 V DC input circuit (P0922YU) provides a range of 85 to 265 V AC at 47 to 63 Hz operation (or 108 to 145 V DC) to meet world-wide power requirements. The 24 V DC power supply input circuit (P0922YC) accepts a range of 18 V DC to 35 V DC. High Efficiency The sealed power supply has high efficiency (up to 95% for P0922YU and up to 81% for P0922YC) resulting in high reliability and low failure rates. They have a return-oninvestment (ROI) of less than two years based upon average electrical rates and load.? Wide range of AC and DC input voltages ? High efficiency ? Power factor correction ? Dual stage current limiting ? Overvoltage shut down circuitry ? Transformer isolated 24 V DC output ? Class 1, DIV 2, Zone 2 applications ? UL?, UL-C and CENELEC Certifications ? G3 rating for harsh environments ? Power for external field devices ? Convection cooling (no fans) ? Gasketed and sealed housing ? Horizontal or vertical DIN rail mounting ? Holes for bracket or wall mounting ? Relay (form C) status alarm output Power Factor Correction Circuitry The advanced design for AC inputs (P0922YU) provides an active sinusoidal current profile for near-unity controlled power factor. Current Limiting The power supply operates as a constant voltage source with maximum load ratings as listed in the specifications. If load current attempts to exceed greater than 110% of maximum current at the rated 25°C load, the output voltage begins to decrease toward zero, thereby limiting the current delivered to the load. Upon removal of overload, normal operation resumes.
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
