3BSE006096R1工控設備卡件
SERVOSTAR?CD-Lite是SERVOSTAR系列中新的經濟型產品。設計主要用于電流回路應用，該放大器提供全數字電流的高性能
以及速度回路控制。數字控制帶來了易于使用的所有優點，消除了需要調整電位計。由于控制回路參數以數字方式存儲，因此沒有漂移
隨著時間的推移，這是一場表演。工作模式通過±10 VDC命令啟用內部正弦。
為SERVOSTAR CD-Lite提供的文件包括本文件SERVOSTAR?
CD-Lite快速啟動手冊，以及SERVOSTAR?CD-Lite變量和命令參考。這些用于幫助您安裝和使用SERVOSTAR CD-Lite產品。
產品特點
SERVOSTAR CD-Lite包含大量功能。其各種控制技術、接口，用戶工具為客戶提供了完全兼容的放大器，以滿足大多數運動控制應用。
主要特點
? 數字電流環
? 速度環模式
? 提供3、6或10安培連續電流
? 自保護功率級
? 編碼器反饋
? PWM開關頻率敢達16 kHz
? 支持Danaher Motion Kollmorgen廣泛的電機解決方案
? 可選24 VDC邏輯輸入電源，與主電源分開
? 使用MOTIONLINK輕松調整和設置? 窗戶?
? 利用個性化模塊輕松初始化。
穩健設計
? 完全隔離的電子設備
? 輸出相間短路、過電壓、欠電壓、過電流、過熱（電機和驅動器）、反饋損失的故障保護
? 電流回流（I2t）可防止驅動器過熱
? 可選擇與Danaher Motion Kollmorgen的再生電阻反饋裝置一起使用
? 帶HED（霍爾效應裝置）的增量編碼器A/B/Z
? 帶HED（霍爾效應裝置）的增量編碼器A/B
? HED（霍爾效應器件）正弦波或六階
? 分解器（僅帶外部24 VDC提供的邏輯電源）
放大器配置
? 使用MOTIONLINK? 配置放大器
? 使用個性化模塊快速輕松地配置附加放大器
The SERVOSTAR? CD-Lite is a new economic addition to the SERVOSTAR family. Designed
primarily for current loop applications, this amplifier provides high performance with fully digital current
and velocity loop control. Digital control brings with it all the advantages of ease of use, eliminating the
need adjusting potentiometers. Since the control loop parameters are stored digitally, there is no drift in
performance over time. Operating modes enable internal sinusoidal from a ±10 VDC command.
The documentation provided for the SERVOSTAR CD-Lite includes this document, the SERVOSTAR?
CD-Lite Quick Start manual, and the SERVOSTAR? CD-Lite Variable and Command Reference. These
are provided to assist you in installation and use of the SERVOSTAR CD-Lite product.
Product Features
The SERVOSTAR CD-Lite includes a vast array of features. Its various control techniques, interfaces,
and user tools give the customer a fully compatible amplifier to meet most motion control applications.
The user features are:
Main Features
? Digital current loop
? Velocity loop mode
? Available in 3, 6, or 10 amp continuous current
? Self protecting power stage
? Encoder feedback
? PWM switching frequency up to 16 kHz
? Supports Danaher Motion Kollmorgen’s wide range of motor solutions
? Optional 24 VDC logic input supply, to separate from main supply
? Easy tuning and setup using MOTIONLINK? for Windows?
? Easy initialization utilizing a Personality Module.
Robust Design
? Fully isolated electronics
? Fault Protection against output phase to phase short circuit, over-voltage, under-voltage, overcurrent, over-temperature (motor and drive), feedback loss
? Current foldback (I2t) provides protection against over-heating drive
? Can be optionally used with Danaher Motion Kollmorgen's Regeneration Resistor FeedBack Devices
? Incremental Encoder A/B/Z with HED (Hall Effect Device)
? Incremental Encoder A/B with HED (Hall Effect Device)
? HED (Hall Effect Device) sine wave or six step
? Resolver (only w/ Logic power supplied from external 24 VDC)
Amplifier Configuration
? Use MOTIONLINK? to configure the amplifier
? Use the Personality Module to quickly and easily configure additional amplifiers
