BRAKE BCC-1 工業模塊
構造此命令時未使用數據庫值。與命令一起使用的限定符參數通過將以下列表中的選項：
參數限定符：0=未使用
1=先前加載參數的作用/失效（點索引=0）
2=指定點索引參數的作用/失效
3=尋址數據的持續循環或周期性傳輸?shù)膭?dòng)作/動作對象
4至127=按標準保留
128至255=專用（專用范圍）
激活限定符：0=停用256=激活此部分定義在端口x上運行的會話y。會話計數
配置[IEC-870-5-101主文件]部分中的參數（第47頁）確定此端口的會話數（受控設備）。
會話由從零開始的索引值引用。例如，如果模塊配置為四個會話，配置文件應包含會話0至3的章節（即，[IEC-101主會話0]至[IEC-101主會話3））。
[IEC-101主會話y]中的參數定義了接口的特定受控設備。
MVI56-101M模塊的應用需要梯形邏輯。
任務必須由梯形圖邏輯處理模塊數據傳輸、特殊塊處理和狀態數據接收。此外，加電處理器可以是
需要處理模塊數據的初始化并清除任何處理器故障狀況。
對示例梯形圖邏輯進行了廣泛的注釋，以提供有關每個梯級的目的和功能。對于大多數應用程序，示例梯形圖將不加修改地工作。模塊數據與MVI56-101M模塊相關的所有數據都存儲在用戶定義的數據類型中。
在使用模塊之前，需要數據類型的實例。這是通過在控制器標記編輯標記中聲明數據類型的變量來完成對話框。
3.1.1模塊狀態數據和變量（101MmoduleDef）與MVI56-101M相關的所有狀態和變量數據存儲在用戶定義的系統中數據類型。在使用模塊之前，需要數據類型的實例習慣于這是通過在控制器標記中聲明數據類型的變量來實現的“編輯標記”對話框。下表描述了對象的結構。
No database value used with the construction of this command.
The Qualifier Parameter used with the command is determined by summing the
options from the lists that follow:
Parameter Qualifier:
0=Not used
1=Act/Deact of previously loaded parameters (point index = 0)
2=Act/Deact of the parameter of the point index specified
3=Act/Deact of persistent cyclic or periodic transmission of the addressed
object
4 to 127 = Reserved by standard
128 to 255 = Reserved for special use (private range)
Activation Qualifier:
0=Deactivate
256=Activate This section defines Session y, which runs on Port x.The Session Count
parameter in the [IEC-870-5-101 Master] section of the configuration (page 47)
determines the number of sessions (controlled devices) for this port.
The sessions are referenced by a zero-based index value. For example, if the
module is configured for four sessions, the configuration file should contain
sections for Sessions 0 to 3 (that is, [IEC-101 Master Session 0] to [IEC-101
Master Session 3]).
The parameters in [IEC-101 Master Session y] define the characteristics of the
specific controlled device to interface. Ladder logic is required for application of the MVI56-101M module. Tasks that
must be handled by the ladder logic are module data transfer, special block
handling, and status data receipt. Additionally, a power-up handler may be
needed to handle the initialization of the module’s data and to clear any
processor fault conditions.
The sample ladder logic is extensively commented, to provide information on the
purpose and function of each rung. For most applications, the sample ladder will
work without modification. Module Data
All data related to the MVI56-101M module is stored in a user defined data type.
An instance of the data type is required before the module can be used. This is
done by declaring a variable of the data type in the Controller Tags Edit Tags
dialog box.
3.1.1 Module Status Data and Variables (101MmoduleDef)
All status and variable data related to the MVI56-101M is stored in a user defined
data type. An instance of the data type is required before the module can be
used. This is done by declaring a variable of the data type in the Controller Tags
Edit Tags dialog box. The following table describes the structure of the object.
