ABB 086318-002工業卡件
如果啟用了自動引導，則自動引導過程將嘗試從掃描列表中指定的設備啟動（例如。，F(xiàn)DISK/CDROM/TAPE/HDISK）。（默認）N如果啟用了自動引導，則自動引導過程使用要引導的控制器LUN和設備LUN。如果自動引導掃描選項為，則顯示引導設備列表啟用。如果修改列表，請遵循上面顯示的格式（大寫）字母，使用正斜杠作為分隔符）。
ABB 086318-002工業卡件自動引導控制器LUN=00？請參閱PPCBug固件包用戶手冊，以獲取目前由PPCBug支持的磁盤/磁帶控制器模塊。（默認值=$00)自動引導設備LUN=00？請參閱PPCBug固件包用戶手冊，以獲取PPCBug當前支持的磁盤/磁帶設備（默認值=$00）自動引導分區號=00？根據PowerPC中的規定，要引導哪個磁盤“分區”參考平臺（PRP）規范。如果設置為零，則固件按順序（1、2、3、4）搜索分區，直到找到第一個“可引導”分區隔斷這就是將被引導的分區。其他可接受值為1、2、3或4。在這四種情況下，指定的分區將是無需搜索即可啟動。自動啟動序列在啟動之前延遲的時間（秒）靴子延遲的目的是允許您選擇停止使用鍵啟動。時間值為0-255秒。（默認值=7秒）
自動引導默認字符串[空字符串為NULL]=？您可以指定一個字符串（文件名），該字符串將傳遞給正在處理的代碼已啟動。此字符串的最大長度為16個字符。（默認值=null字符串）
ROM啟動啟用[Y/N]=N？ROM僅在通電時啟動[是/否]=是？ROM引導啟用VMEbus搜索[Y/N]=N？ROM啟動中止延遲=5？ROMboot序列在啟動之前延遲的時間（秒）靴子延遲的目的是允許您選擇停止使用鍵啟動。時間值為0-255秒。（默認值=5秒）
ROM引導直接啟動地址=FFF00000？PPCBug搜索ROMboot模塊時測試的第一個位置。（默認值=$FFF00000）Y ROMboot功能已啟用。N ROMboot功能被禁用。（默認）Y ROMboot僅在通電時嘗試。（默認）N在任何重置時嘗試ROMboot。Y VMEbus地址空間，除常規區域外的內存，將搜索ROMboot模塊。N VMEbus地址空間將不會被訪問羅姆布特。（默認）
If Autoboot is enabled, the Autoboot process attempts
to boot from devices specified in the scan list (e.g.,
FDISK/CDROM/TAPE/HDISK). (Default)
N If Autoboot is enabled, the Autoboot process uses the
Controller LUN and Device LUN to boot.The listing of boot devices displayed if the Autoboot Scan option is
enabled. If you modify the list, follow the format shown above (uppercase
letters, using forward slash as separator).
Auto Boot Controller LUN = 00?
Refer to the PPCBug Firmware Package User’s Manual for a listing of
disk/tape controller modules currently supported by PPCBug. (Default =
$00)
Auto Boot Device LUN = 00?
Refer to the PPCBug Firmware Package User’s Manual for a listing of
disk/tape devices currently supported by PPCBug.
(Default = $00)
Auto Boot Partition Number = 00?
Which disk “partition” is to be booted, as specified in the PowerPC
Reference Platform (PRP) specification. If set to zero, the firmware
searches the partitions in order (1, 2, 3, 4) until it finds the first “bootable”
partition. That is then the partition that will be booted. Other acceptable
values are 1, 2, 3, or 4. In these four cases, the partition specified will be
booted without searching.The time in seconds that the Autoboot sequence delays before starting the
boot. The purpose for the delay is to allow you the option of stopping the
boot by use of the <Break> key. The time value is from 0-255 seconds.
(Default = 7 seconds)
Auto Boot Default String [NULL for an empty string] = ?
You may specify a string (filename) which is passed on to the code being
booted. The maximum length of this string is 16 characters. (Default = null
string)
ROM Boot Enable [Y/N] = N?
ROM Boot at power-up only [Y/N] = Y?
ROM Boot Enable search of VMEbus [Y/N] = N?
ROM Boot Abort Delay = 5?
The time in seconds that the ROMboot sequence delays before starting the
boot. The purpose for the delay is to allow you the option of stopping the
boot by use of the <Break> key. The time value is from 0-255 seconds.
(Default = 5 seconds)
ROM Boot Direct Starting Address = FFF00000?
The first location tested when PPCBug searches for a ROMboot module.
(Default = $FFF00000)
Y The ROMboot function is enabled.
N The ROMboot function is disabled. (Default)
Y ROMboot is attempted at power-up only. (Default)
N ROMboot is attempted at any reset.
Y VMEbus address space, in addition to the usual areas
of memory, will be searched for a ROMboot module.
N VMEbus address space will not be accessed by
ROMboot. (Default)
