3BHE024856P201中文說明，ABB控制模塊
兩種版本的基板都提供并行輸入/輸出連接。對于MVME712M兼容基板，并行接口為采用36針Centronics型插座連接器。這個接頭位于MVME712M過渡模塊上。MVME2700同時提供AUI和10BaseT/100BaseTX LAN連接。對于MVME712M兼容基板，LAN接口AUI連接是否使用位于上的DB-15連接器（J6）實現MVME712M過渡模塊。
3BHE024856P201中文說明MVME761兼容版本下表總結了特定于配置用于MVME761的MVME2700模塊過渡模塊。VMEbus連接器P2兩個160針接頭（P1和P2）提供MVME2700和VMEbus。P1為24位尋址和16位數據提供電源和VME信號。其引腳分配由VMEbus規范設置。P2行A、C、Z和D向MVME761過渡模塊。P2 B行為MVME2700提供電源，具有上面的八條VMEbus地址線，以及額外的16條VMEbus數據線。串行端口1和2MVME2700提供異步（端口1和2）和同步/異步（端口3和4）串行連接。這個異步接口使用一對符合EIA-574的位于MVME761轉換上的DB9連接器（COM1和COM2）單元串行端口3和4對于與MVME761兼容的基板版本端口3和4的同步/異步接口由一對HD26連接器（J7和J8），位于過渡模塊。有關各種互連信號的詳細說明，請參閱MVME2700 single的支持信息文檔包板機或過渡的支持信息部分必要時提供模塊文檔。概述PowerPC調試器PPCBug是一種多功能工具，用于評估和圍繞摩托羅拉PowerPC微型計算機構建的調試系統。它的主要用途是測試和初始化系統硬件，確定硬件配置，并引導操作系統。設施也是可用于在“完成”下加載和執行用戶程序操作員控制系統評估。PowerPC調試器提供了高度的功能和用戶體驗友好，但強調便攜性和易于維護。它實現了這些功能，因為它完全是用C語言編寫的編程語言，除非需要使用匯編程序功能。
Both versions of the base board provide parallel I/O connections. For
MVME712M-compatible base boards, the parallel interface is
implemented with a 36-pin Centronics-type socket connector. The
connector is located on the MVME712M transition module. The MVME2700 provides both AUI and 10BaseT/100BaseTX LAN
connections. For MVME712M-compatible base boards, the LAN interface
is an AUI connection implemented with a DB-15 connector (J6) located on
the MVME712M transition module. MVME761-Compatible Versions
The next tables summarize the pin assignments of connectors specific to
MVME2700 modules that are configured for use with MVME761
transition modules.
VMEbus Connector P2
Two 160-pin connectors (P1 and P2) supply the interface between the
MVME2700 and the VMEbus.
P1 provides power and VME signals for 24-bit addressing and 16-bit data.
Its pin assignments are set by the VMEbus specification.
P2 rows A, C, Z, and D provide power and interface signals to the
MVME761 transition module. P2 row B supplies the MVME2700 with
power, with the upper eight VMEbus address lines, and with an additional
16 VMEbus data lines. Serial Ports 1 and 2
The MVME2700 provides both asynchronous (ports 1 and 2) and
synchronous/asynchronous (ports 3 and 4) serial connections. The
asynchronous interface is implemented with a pair of EIA-574-compliant
DB9 connectors (COM1 and COM2) located on the MVME761 transition
module. Serial Ports 3 and 4
For MVME761-compatible versions of the base board, the
synchronous/asynchronous interface for ports 3 and 4 is implemented with
a pair of HD26 connectors (J7 and J8) located on the front panel of the
transition module.For detailed descriptions of the various interconnect signals, consult the
support information documentation package for the MVME2700 single
board computer or the support information sections of the transition
module documentation as necessary.Overview
The PowerPC debugger, PPCBug, is a versatile tool used to evaluate and
debug systems built around Motorola PowerPC microcomputers. Its
primary uses are to test and initialize the system hardware, determine the
hardware configuration, and boot the operating system. Facilities are also
available for loading and executing user programs under complete
operator control for system evaluation.
The PowerPC debugger provides a high degree of functionality and user
friendliness, and yet stresses portability and ease of maintenance. It
achieves these features because it was written entirely in the C
programming language, except where necessary to use assembler
functions.
