HE663599-31813模塊卡件,LT9673a使用方法教程
? 由+5V直流電源開發(fā)的熔斷SCSI終端電源接頭P2處
? 一個64針DIN連接器,用于連接EIA-232-D、并行、SCSI、,和以太網信號傳輸至MVME712MMVME761過渡模塊MVME761過渡模塊(第1-26頁圖1-12)和P2適配器板與MVME2603/2604底座一起使用板
MVME761的功能包括:
? 并行打印機端口(符合IEEE 1284-I)
? 支持10BaseT/100BaseTX連接的以太網接口
HE663599-31813模塊卡件? 兩個EIA-232-D異步串行端口(標識為COM1和前面板上的COM2)
? 兩個同步串行端口(前端的串行3和串行4面板),可配置EIA-232-D、EIA-530、V.35或X.21協(xié)議? 兩個60針串行接口模塊(SIM)連接器串行接口模塊MVME761上的同步串行端口可通過串行端口配置接口模塊(SIM),與適當的跳線一起使用過渡模塊和基板上的設置。SIM是小型插件印刷電路板,包含將TTL電平端口轉換為各種工業(yè)標準串行接口(如EIA-232、EIA-530等)所需的標準電壓電平所需的所有電路。SIM是可用于以下配置:本章總結了以下幾組的引腳分配:MVME2603/2604的互連信號:
? 具有MVME712M通用引腳分配的連接器作為MVME761兼容版本的基板? 具有特定于MVME761的引腳分配的連接器-基板的兼容版本下表僅提供管腳分配。有關詳細信息有關各種互連信號的說明,請咨詢支持部門MVME2603/2604 single的信息文檔包板機或過渡的支持信息部分必要的模塊文檔
Fused SCSI terminator power developed from the +5V DC present
at connector P2
? A 64-pin DIN connector to interface the EIA-232-D, parallel, SCSI,
and Ethernet signals to the MVME712M
MVME761 Transition Module
The MVME761 transition module (Figure 1-12 on page 1-26) and P2
adapter board are used in conjunction with the MVME2603/2604 base
board.
The features of the MVME761 include:
? A parallel printer port (IEEE 1284-I compliant)
? An Ethernet interface supporting 10BaseT/100BaseTX connections
? Two EIA-232-D asynchronous serial ports (identified as COM1 and
COM2 on the front panel)
? Two synchronous serial ports (SERIAL 3 and SERIAL 4 on the front
panel), configurable for EIA-232-D, EIA-530, V.35, or X.21
protocols
? Two 60-pin Serial Interface Module (SIM) connectors
Serial Interface Modules
The synchronous serial ports on the MVME761 are configurable via serial
interface modules (SIMs), used in conjunction with the appropriate jumper
settings on the transition module and base board. The SIMs are small plugin printed circuit boards which contain all the circuitry needed to convert TTL-level port to the standard voltage levels needed by various industrystandard serial interfaces, such as EIA-232, EIA-530, etc. SIMs are
available for the following configurations:This chapter summarizes the pin assignments for the following groups of
interconnect signals for the MVME2603/2604:
? Connectors with pin assignments common to MVME712M, as well
as MVME761-compatible versions of the base board? Connectors with pin assignments specific to MVME761-
compatible versions of the base board
The following tables furnish pin assignments only. For detailed
descriptions of the various interconnect signals, consult the support
information documentation package for the MVME2603/2604 single
board computer or the support information sections of the transition
module documentation as necessary