3BSE042234R2觸摸屏,3BSE042234R2顯示屏
安裝機箱互連電纜要將最多三個機箱連接在一起（最多30個I/O插槽），請安裝連接電源之前，請先連接機箱互連電纜。
安裝輸入/輸出模塊并連接電源使用模塊的安裝說明/用戶手冊將其安裝到機箱。
使用電源的安裝說明將其連接到您的機箱。
3BSE042234R2觸摸屏危險位置注意事項本設備適用于I類2類A、B、C、D或僅限非危險場所。以下警告聲明適用于危險場所。
UL認證的工業控制設備，經美國和加拿大認證
UL認證用于1級2類A、B、C、D組危險場所，認證用于美國和加拿大歐盟89/336/EEC EMC指令，符合
EN 50082-2工業抗擾度
EN 61326，Meas/控制/實驗室，工業要求
EN 61000-6-2，工業抗擾度
EN61000-6-4，工業排放
符合：AS/NZS 2064，工業排放!警告爆炸危險
?替換組件可能會影響I類，2類。
?不要更換部件或斷開設備除非電源已關閉或已知區域無危險。
?除非通電，否則不要連接或斷開組件
已關閉或已知該區域無危險。
?所有接線必須符合N.E.C.第501-4（b）條的規定。
Hazardous Location Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or
non-hazardous locations only. The following WARNING statement applies to use in
hazardous locations.
Specifications (continued)
certification
UL Listed Industrial Control Equipment, certified for US and Canada
UL Listed for Class 1 Division 2, Group A, B, C, D Hazardous Locations, certified for
US and Canada
European Union 89/336/EEC EMC Directive, compliant with
EN 50082-2 Industrial Immunity
EN 61326, Meas./Control/Lab., Industrial Requirements
EN 61000-6-2, Industrial Immunity
EN61000-6-4, Industrial Emissions
Australian Rediocommunications Act, compliant with :
AS/NZS 2064, Industrial Emissions
!
WARNING
EXPLOSION HAZARD
?
Substitution of components may impair suitability for
Class I, Division 2.
?
Do not replace components or disconnect equipment
unless power has been switched off or the area is known
to be non-hazardous.
?
Do not connect or disconnect components unless power
has been switched off or the area is known to be
non-hazardous.
?
All wiring must comply with N.E.C. article 501-4(b).
