1MRB300162R0008模塊,1MRB300162R0008使用參數
特征
?輸入電壓115-230 VAC（自調整），輸出電隔離
?電源輸出提供：
SA 801 F：5 V DC/5 A和3.3 V DC/5 A
SA 811 F：5 V DC/5.5 A和3.3 V DC/6.5 A
?增強的電源故障預測和停機程序
?LED指示電源狀態和工作狀態
AC 800F的狀態
?防短路，限流
?主電源情況下使用的20 ms備用電能
1MRB300162R0008模塊根據NAMUR的說法，失敗描述AC 800F模塊配備5 V DC/5 A和SA 801F提供的3.3 V DC/5 A輔助電源或5 V DC/5.5 A輔助電源
以及SA 811F電源的3.3 V DC/6.5 A。權力電源斷路、過載和持續短路
保護電子控制輸出電壓提供高穩定性和低殘余紋波。
在斷電的情況下≥5 ms時，電源模塊發出電源故障信號。該信號由CPU模塊使用
關閉操作并進入安全狀態。這是在電源恢復時控制重啟系統和用戶應用程序所必需的。輸出電壓保持不變在其公差范圍內至少再保持15 ms。總共將管理20 ms的電源電壓降。
Features
? Input voltage 115 - 230 VAC (self adjusting), output is elec
trically isolated
? Power supply outputs provide:
SA 801 F: 5 V DC / 5 A and 3.3 V DC / 5 A
SA 811 F: 5 V DC / 5.5 A and 3.3 V DC / 6.5 A
? Enhanced power-fail prediction and shutdown procedures
? LED indication for power supply status and operating
status of the AC 800F
? Short circuit proof, current limited
? 20 ms backup energy for use in the event of primary power
failure, according to NAMUR
Description
The AC 800F modules are supplied with 5 V DC / 5 A and
3.3 V DC / 5 A auxiliary power by the SA 801F or 5 V DC / 5.5 A
and 3.3 V DC / 6.5 A by the SA 811F power supply. The power
supply has open-circuit, overload and sustained short-circuit
protection. The electronically controlled output voltage provides
high stability and low residual ripple.
In case of power loss ≥5 ms, the power supply module gener
ates a power-fail signal. This signal is used by the CPU module
to shut down operations and enter to a safe state. This is re
quired for a controlled restart of the system and the user appli
cation when power is restored. The output voltage remains
within its tolerance limits for at least another 15 ms. Altogether a
mains voltage drop of 20 ms will be managed.
