1771-CAN數字量輸入模塊
1.產 品 資 料 介 紹：
中文資料：
1771-CAN數字量輸入模塊是一款由A-B Rockwell/羅克韋爾自動化公司生產的設備，其主要特性和功能如下：
- 產品概述：
- 型號：1771-CAN
- 品牌：Rockwell/羅克韋爾
- 類型：數字量輸入模塊
- 主要用途：用于工業自動化系統，接收和處理外部數字信號（如開關狀態、傳感器狀態等）。
- 主要功能與特點：
- 輸入類型：支持多種數字輸入信號類型，如開關狀態、傳感器狀態等。
- 自檢功能：提供儀器自檢方法，確保設備正常工作。
- 清洗與安裝：需要在使用前進行電解池的清洗和安裝，以及注液處理。
- 結構特征：主機前面包含電解按鍵、實測水分顯示、啟動按鍵、終點指示、測量電位和電解電流顯示等功能。
- 操作與使用：
- 短接電解插座，進行快速計數和蜂鳴器響應測試。
- 短接測量插座，確保電解和測量指示為零且不計數。
- 按下啟動鍵，進行電解測試，并觀察終點指示燈和蜂鳴器響應。
- 自檢方法：
- 電解池清洗與安裝：清洗后需干燥，并避免用清水洗以避免測量誤差。安裝時需注意密封。
- 注液：在通風櫥內進行，確保陰、陽極室液面基本達到水平。
- 兼容性：
- 與多種機箱兼容，如1171-A1B、A2B、A3B、A3B1、A4B、AM1和AM2機箱。
- 支持多種輸入設備，如接近開關、選擇開關、限位開關、按鈕開關和浮動開關。
- 電氣隔離：
- 模塊可能具有電氣隔離功能，以保護控制系統免受外部電源干擾。
- 模塊化設計：
- 采用模塊化設計，方便用戶根據需要進行配置和擴展。
英文資料
The 1771-CAN digital input module is a device produced by A-B Rockwell/Rockwell Automation, and its main features and functions are as follows:
Product Overview:
Model: 1771-CAN
Brand: Rockwell/Rockwell
Type: Digital input module
Main use: Used in industrial automation systems to receive and process external digital signals (such as switch status, sensor status, etc.).
Main functions and features:
Input Type: Supports multiple digital input signal types, such as switch status, sensor status, etc.
Self inspection function: Provides a method for instrument self inspection to ensure the normal operation of the equipment.
Cleaning and installation: It is necessary to clean and install the electrolytic cell, as well as perform liquid injection treatment before use.
Structural features: The front of the host includes functions such as electrolysis button, measured moisture display, start button, endpoint indicator, measured potential and electrolysis current display.
Operation and Use:
Self inspection method:
Short circuit the electrolytic socket for fast counting and buzzer response testing.
Short circuit the measuring socket to ensure that the electrolysis and measurement indicators are zero and not counted.
Press the start button to perform an electrolysis test and observe the endpoint indicator light and buzzer response.
Electrolytic cell cleaning and installation: After cleaning, it should be dried and avoid washing with clean water to avoid measurement errors. Pay attention to sealing during installation.
Liquid injection: carried out in a fume hood to ensure that the liquid levels in the anode and cathode chambers are basically level.
Compatibility:
Compatible with various chassis, such as 1171-A1B, A2B, A3B, A3B1, A4B, AM1, and AM2 chassis.
Supports multiple input devices, such as proximity switches, selector switches, limit switches, button switches, and float switches.
Electrical isolation:
The module may have electrical isolation function to protect the control system from external power interference.
Modular design:
Adopting modular design, it facilitates users to configure and expand according to their needs.
2.產 品 展 示
3.產 品 展 示
HONEYWELL 05704-A-0146 DIGITAL
PROSOFT MVI46-MCM COMMUNICATIO
KOLLMORGEN CP310250 伺服驅動器
| PMB33F-20201-03 | DT 370A | R23GENA-R1-NS-VS-01 |
| PMB33F-20101-00 | DT 371A | R43HCNA-NP-RW-VS-03 |
| PMB33F-10216-03 | GJR2 242100 R1 | R45GCNA-TS-NS-NV-00 |
| PMB33F-20201-02 | ABB DSAO120A 3BSE018293R1 | R35KMNC-TS-RC-NV-02 |
| R46GSNA-R2-NS-VS-04 | R32HSNC-TS-NS-NV-02 | R22GENT-TS-NS-NV-02 |
| R65HENA-TS-NS-NV-00 | R43HCBA-R2-NS-VS-00 | R35GENH-R2-NS-NV-00 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:HTTP://www.qing-ting.cn