CI858以太網接口模塊,CI858使用指導
主風機組根據總管流量關小防喘閥，備風機組自動逐漸根據總管流量打開防喘閥。
5、直至備風機組出口單向閥關閉或者程序自動指示備機切出裝置。
6、HMI自動彈出主備機切機完成指示，操作工首先點擊取消切機，然后操作工需要到現場把備風機組出口電動閥手動關閉，最后手動可以把備風機切入安全運行狀態。
5.切機運行效果分析CI858以太網接口模塊
圖5-1主風機組切入系統工藝趨勢
由圖5-1所示，各曲線含義分析如下：
白色曲線是主風機組防喘閥的輸出曲線，在緩慢關閉；
藍色曲線是備風機組防喘閥的輸出曲線，在緩慢打開；
黃色曲線是總管流量的設定值；
綠色曲線是總管流量的實測值；
紅色曲線是總管壓力的實測值；
紫色曲線是主風機組出口排氣壓力值；
淺藍色曲線是備風機組出口排氣壓力值；
粉色曲線是開始切機標志。
通過以上曲線的走勢可以看出，機組在切機過程中，實際總管壓力及流量均在設定值附近穩定運行，表明切機過程平穩無波動。
6.兩器壓差控制過程
圖4-1兩器壓差控制畫面
由圖4-1所示，分析如下：CI858以太網接口模塊
增設了調節偏差死區功能，減少了煙機蝶閥、大小旁通閥頻繁調節；
取消了原先設置的爬坡功能，調節更及時有效； PID controller with this. The so-called control can be divided into feedback control and no feedback control. Of course, the PID we discuss has feedback control. The so-called feedback control is nothing more than to participate in the operation to determine the size or direction of the control quantity according to the situation of the controlled quantity. So how to determine the size of the control quantity according to the two controlled quantities? Alas, there are many classifications. The so-called advanced control mode is "advanced" at this point, There are "adaptive control, fuzzy control, predictive control, neural network control, expert intelligent control" and so on (as for the advantages of these control methods, alas, I only used PID, and I can't say anything else. If I go to copy books, it's not convincing, and the key is to be lazy to copy them. If the old brother wants to write a paper, he can give play
